英文50_DIS-A_2018105264_炭素材料表面粗糙度试验方法-v6.pdfVIP

ICS 29.050 CCS Q52 NationalStandards of the People’s Republic of China GB/T xxxx-xxxx Test method for surface roughness of carbon materials 炭素材料表面粗糙度试验方法 （English Translation） （征求意见稿） Issue date:XXXX-XX-XX Implementation date:XXXX-XX-XX Issued by State Administration for Market Regulation Standardization Administration of the Peoples Republic of China GB/TXXXX-202X Test method for surface roughness of carbon materials 1 Scope This document describes the principle, apparatus, specimen, procedure, and report of the surface roughness testing method for carbon materials. Thisdocument isapplicabletotheevaluationofsurfaceroughnessofcarbonmaterial products with particle size less than 1.6mm with the stylus profilometry method. The typicalmeasurement parameter is the arithmetic mean deviation of the profile (Ra), but other parameters such as the maximum profile peak-to-valley height (Rz) may be selected as needed. For other carbon materials this method can be employed as a reference. 2 Normative references The contents of the following documents are an essential part of this document through normative references cited in the text. For the referenced documents with a specified date,only the versioncorresponding to that date isapplicable to this document;Forthe referenceddocumentswithouta specifieddate,the latest version (including all amendments) is applicable to this document. GB/T6062GeometricalProductSpecification (GPS)-Surfacetexture:Profilemethod- Nominalcharacteristics of contact (stylus) instruments. GB/T 8170 Rules of rounding off for numericalvalues expression and judgement of limiting values 3 Terminology and Definitions The following terminology and definitions are applicable to th