ABB Installation Instructions Part THQLLX1 说明(英语)用户手册.pdf

DEH 41103 Generator Interlock Kit Installation Instructions R05 GE Energy PowerMark GoldTM Generator Interlock Kit: THQLLX1 WARNING: Hazard of electrical shock or burn Turn off power supplying this equipment before working inside General Step 2: Drill the Mounting Holes on Dead front To comply with the National Electrical Code and Underwriters Laboratories, the Generator Interlock kit A drilling template is provided to ensure proper alignment must be installed in accordance with the information of the interlock contained in this instruction manual and by a qualified 1. Locate dead front removed earlier in Step 1. electrical contractor and/or licensed electrician. 2. Insert the folds of the template in the knockout of 4- pole main breaker and slide towards the branch Introduction breaker knockouts until it ceases to slide further (see Figure 2). This bulletin provides instructions for installing the interlock and circuit breaker retainer on the 150-255A 3. Drill the pilot holes through the two identified holes in rated Model 6 PowerMarkTM Gold GE Load Centers. the template using a 3/32” (0.093”) drill bit.