3D打印与创客 “攀岩头盔”3D打印后处理 课件：攀岩头盔3D打印后处理(中英）.pptxVIP

攀岩头盔创新设计与3D打印Innovative design and 3D printing of climbing helmet3D打印后处理Post- process of 3 D printing 移出粉包Take out the powder package进入手动控制界面，设置参数从设备中移出成型缸Enter the manual control interface and set parameters to remove the forming cylinder from the equipment 移出粉包Take out the powder package使用移动叉车将清粉铲、取粉罩及罩内粉包一起转移到清粉台。Use the mobile forklift to transfer the powder shovel, the powder cover and the powder bag in the cover to the powder cleaning platform. 将零件放到喷砂机内进行喷砂处理，将零件表层的粉末彻底清除。Place the parts in the sandblasting machine for sandblasting, and thoroughly remove the powder on the surface of the