o桥梁检测完整版.pptxVIP

Data Collection and Processing Methodology 工作照片 Model 5100 天线 波形调整 Figure 1 : Typical waveform shape with antenna positioned over rebar . The signal is set up so that the direct coupling and the peak amplitudes are well within the boundaries of the sampling window. Figure 2 : Badly positioned waveform. The direc coupling is not located in the window. Using th signal positioned as shown in this figure woul cause the program to give erroneous results. Prior to collecting data the user must manuall adjust the signal position until the direct coupling is located entirely in the window