【英语版】国际标准 ISO 15629:2002 EN 用于材料搬运的托盘 用于组装新的和维修旧的平木托盘的紧固件质量 Pallets for materials handling — Quality of fasteners for assembly of new and repair of used, flat, wooden pallets.pdf
- 29
- 0
- 2024-07-21 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 2002-11-19 颁布
ISO15629:2002是关于用于物料搬运的木制平托盘(Palletsformaterialshandling)中的装配用的紧固件质量的规定标准。下面我将对这个标准的详细解释:
这个标准主要用于确保用于物料搬运的木制平托盘(Palletsformaterialshandling)的装配质量,其中包括新托盘的组装以及旧托盘的修复。标准关注的内容主要包括紧固件的质量,这不仅包括使用的数量和质量,还包括它们的布置和装配方式。
对于新托盘的组装,该标准强调了用于连接和固定的紧固件应满足一定的质量要求。这包括材料的质量,紧固件尺寸的精度,以及制造工艺的精度。这些因素将直接影响托盘的结构强度和使用寿命。
对于旧托盘的修复,标准要求更严格。标准规定了可以用于修复使用的紧固件的数量和类型,同时还需要满足一些特殊的要求。比如修复使用的紧固件应当保持一定的完整性和性能,以便于重新安装和使用。同时,在修复过程中也需要保证新的和旧的紧固件的质量和性能的一致性。
ISO15629:2002标准对用于物料搬运的木制平托盘中的装配用的紧固件的质量进行了详细的规范,以确保托盘的结构强度和使用寿命,从而保证物料搬运过程的效率和安全性。
以上就是ISO15629:2002标准的详细解释。如还有其他问题,欢迎随时提问。
您可能关注的文档
- 国际标准 ISO 15614-1:2017/AMD 1:2019 EN 金属材料焊接程序的规范和资格认证 焊接程序测试 第1部分:钢的电弧焊和气焊以及镍和镍合金的电弧焊 修正案1 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc weldi.pdf
- 国际标准 ISO 15614-1:2017/AMD 1:2019 EN Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys — Amendment 1 金属材料焊接程序的.pdf
- 国际标准 ISO 15614-10:2005 EN 金属材料焊接程序的规范和鉴定 焊接程序测试 第10部分:高压氧干焊 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 10: Hyperbaric dry welding.pdf
- 国际标准 ISO 15614-10:2005 EN Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 10: Hyperbaric dry welding 金属材料焊接程序的规范和鉴定 焊接程序测试 第10部分:高压氧干焊.pdf
- 国际标准 ISO 15614-11:2002 EN 金属材料焊接程序的规范和鉴定 焊接程序测试 第11部分:电子和激光束焊接 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 11: Electron and laser beam welding.pdf
- 国际标准 ISO 15614-11:2002 EN Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 11: Electron and laser beam welding 金属材料焊接程序的规范和鉴定 焊接程序测试 第11部分:电子和激光束焊接.pdf
- 国际标准 ISO 15614-12:2021 EN 金属材料焊接程序的规范和鉴定 焊接程序测试 第12部分:点焊、缝焊和凸焊 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 12: Spot, seam and projection welding.pdf
- 国际标准 ISO 15614-12:2021 EN Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 12: Spot, seam and projection welding 金属材料焊接程序的规范和鉴定 焊接程序测试 第12部分:点焊、缝焊和凸焊.pdf
- 国际标准 ISO 15614-13:2023 EN 金属材料焊接工艺规范与资格——焊接工艺试验——第13部分:压焊(电阻对缝)和闪光焊的规范与资格 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 13: Upset (resistance butt) and flash welding.pdf
- 国际标准 ISO 15614-13:2023 EN Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 13: Upset (resistance butt) and flash welding 金属材料焊接工艺规范与资格——焊接工艺试验——第13部分:压焊(电阻对缝)和闪光焊的规范与资格.pdf
- 国际标准 ISO 15629:2002 EN Pallets for materials handling — Quality of fasteners for assembly of new and repair of used, flat, wooden pallets 用于材料搬运的托盘 用于组装新的和维修旧的平木托盘的紧固件质量.pdf
- 国际标准 ISO 15630-3:2019 EN 混凝土加固和预应力用钢 试验方法 第3部分:预应力钢材 Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel.pdf
- 国际标准 ISO 15630-3:2019 EN Steel for the reinforcement and prestressing of concrete — Test methods — Part 3: Prestressing steel 混凝土加固和预应力用钢 试验方法 第3部分:预应力钢材.pdf
- 国际标准 ISO 15632:2021 EN 微束分析 用于规范和检查与扫描电子显微镜 (SEM) 或电子探针微分析仪 (EPMA) 一起使用的能量色散 X 射线光谱仪 (EDS) 的选定仪器性能参数 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (E.pdf
- 国际标准 ISO 15632:2021 EN Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe mic.pdf
- 国际标准 ISO 15633:2017 EN 铁矿石 镍的测定 火焰原子吸收光谱法 Iron ores — Determination of nickel — Flame atomic absorption spectrometric method.pdf
- 国际标准 ISO 15633:2017 EN Iron ores — Determination of nickel — Flame atomic absorption spectrometric method 铁矿石 镍的测定 火焰原子吸收光谱法.pdf
- 国际标准 ISO 15634:2015 EN 铁矿石 铬含量的测定 火焰原子吸收光谱法 Iron ores — Determination of chromium content — Flame atomic absorption spectrometric method.pdf
- 国际标准 ISO 15634:2015 EN Iron ores — Determination of chromium content — Flame atomic absorption spectrometric method 铁矿石 铬含量的测定 火焰原子吸收光谱法.pdf
- 国际标准 ISO 15635:2001 EN 涂敷磨料 翻转盘 Coated abrasives — Flap discs.pdf
原创力文档

文档评论(0)