ECAP对预置孪晶AZ31镁合金组织和力学性能的影响.pdfVIP

2024年第53卷第11期热加工工艺ISSN1001-3814

Vol.53No.112024HotWorkingTechnologyCN61-1133/TG

DOI:10.14158/j.cnki.1001-3814.

http://www.rjrjggy@

ECAP对预置孪晶AZ31镁合金

组织和力学性能的影响

芦鹏彬,吴畏,柴华,王利飞

(太原理工大学材料科学与工程学院,山西太原030024)

摘要为了探究剪切变形对预置孪晶AZ31镁合金组织和力学性能的影响袁对应变量为5%的预置孪晶试样在

250℃进行了不同道次的等通道转角挤压渊ECAP冤袁随后对不同状态试样进行了显微组织观察和室温单轴拉伸测试遥结

果表明院预置孪晶试样经过ECAP变形后袁试样组织与商用挤压态合金相比明显细化袁延展性获得较大提高曰且随着挤

压道次的增加袁合金晶粒更加细小均匀袁延展性改善更加显著遥其中袁挤压四道次合金的室温断后伸长率较挤压态棒材

提高了约163%袁表明预置孪晶后引入剪切变形能有效提高镁合金棒材的室温塑性遥

关键词AZ31镁合金曰预置孪晶曰等通道转角挤压曰晶粒细化曰动态再结晶

中图分类号TG379文献标识码A文章编号1001-3814(2024)11-0107-03

EffectofECAPonMicrostructureandMechanicalPropertiesofPre-twinned

AZ31MgAlloy

LUPengbin,WUWei,CHAIHua,WANGLifei

(CollegeofMaterialsScienceandEngineering,TaiyuanUniversityofTechnology,Taiyuan030024,China)

Abstract院Inordertostudytheeffectofsheardeformationonthemicrostructureandmechanicalpropertiesofthe

pre-twinnedAZ31magnesiumalloy,thepre-twinnedsampleswithastrainlevelof5%weresubjectedtodifferentpassesof

equalchannelangularpressing(ECAP)at250℃.Subsequently,themicrostructureobservationandroom-temperatureuniaxial

tensiletestwerecarriedoutforthesamplesindifferentstates.Theresultsshowthatthemicrostructureofthesamplesis

obviouslyrefinedcompared