TiAl合金板材无包套轧制工艺模拟.pdfVIP

HotWorkingTechnology2023,Vol.52,No.1

TiAl合金板材无包套轧制工艺模拟

刘志栋，李莎，贾燚，赵利平，韩建超

（太原理工大学机械与运载工程学院，山西太原030024)

TiAlTiAl

摘要：针对合金变形抗力高、热加工窗口窄、包套轧制工艺复杂的难题，开展合金板材无包套热辊

轧制过程的有限元模拟，研究不同轧辊温度对板材轧制成形性能的影响，通过不同压下量的轧制模拟得到合适的压

下范围区间参数。结果表明，轧辊温度的提高对于减缓板材在轧制过程中的温降效果显著，并且有利于提高轧制过

程中轧件的变形均匀性；当轧制压下率控制在10%～20%之间时，板材的变形相对均匀，未出现明显应变集中。随着

轧辊温度的增加板材表面均匀性与板形平直度均有明显改善。

关键词：TiAI合金；无包套轧制；温辊热轧；数值模拟

D0I:10.14158/j.cnki.1001-3814.

中图分类号：TG337.6文献标识码：A文章编号：1001-3814(2023)01-0096-05

SimulationofNon-cladRolling

gProcessforTiAlAlloySheet

LIUZhidong,LISha,JIAYi,ZHAOLiping,HANJianchao

(CollegeofMechanicalandVehicleEngineering,TaiyuanUniversityofTechnology,Taiyuan030024,China)

Abstract:Aimingattheproblemsofhighdeformationresistance,narrowhotworkingwindowandcomplexcladding

rollingprocessofTiAlalloy,thefiniteelementsimulationofthehotrollerrollingprocesswithoutcladdingforTiAlalloyplate

wascarriedout,andtheinfluenceofdifferentrollertemperatureonthesheetrollingformabilitywasstudied.Theappropriate

reductionrangeparameterswereobtainedbyrollingsimulationwithdifferentreduction.Theresultsshowthattheincreaseof

rollertemperaturehasasignificanteffectonslowingdownthetemperaturedropintherollingprocess,anditisbeneficialto

improvethedeformationuniformityofthepartduringrolling;whentherollingreductioniscontrolledbetween10%and20%,

thedeformationoftheplateisrelativelyuniform,andthereisnoobviousstrainconcentration.Withtheincreaseoftheroller

temperature,thesurfaceuniformityandflatne