推土机裂土器的热处理工艺研究.pdfVIP

HotWorkingTechnology2021,Vol.50,No.2

推土机裂土器的热处理工艺研究

孟华，葛卫京

(商丘工学院机械工程学院，河南商丘476000)

摘要：对推土机裂土器用ZG35Cr2SiMnMo低合金耐磨钢的热处理工艺和力学性能进行了研究。结果表明：材料

的淬透性值为J40-80,淬透性良好。淬火温度从940°C升高至1030°C时，硬度随淬火温度升高而增加，冲击韧性随淬火

温度升高而降低。在1000-C淬火、220°C回火时，ZG35Cr2SiMnMo钢具有最佳的力学性能，其硬度为53HRC,冲击韧

性为44J.cnr2,相对磨损率为0.62;此时金相组织是板条状马氏体，表面是微观切削的磨损形貌，对比试验说明该材料

具有优异的耐磨性。

关键词：推土机裂土器;ZG35Cr2SiMnMo钢；力学性能;耐磨性；热处理工艺

DOI:10.14158/j.cnki.1001-3814.

中图分类号：TG161文献标识码:A文章编号：1001-3814(2021)2-0132-03

StudyonHeatTreatmentTechnologyofBulldozerRipper

MENHua,GEWeijing

(CollegeofMechanicalEngineering,ShangqiuInsitituteofTechnology,Shangqiu476000,China)

Abstract：TheheattreatmentprocessandmechanicalpropertiesofZG35Cr2SiMnMolowalloywear-resistantsteelfor

bulldozerripperwerestudied.TheresultsshowthatthehardenabilityvalueofthematerialisJ40-80,andthehardenabilityis

good.Whenthequenchingtemperaturerisesfrom940°Cto1030°C,thehardnessincreaseswiththeincreaseofquenching

temperature,andtheimpacttoughnessdecreaseswiththeincreaseofquenchingtemperature.ZG35Cr2SiMnMosteelhasthe

bestmechanicalpropertieswhenquenchedat1000°Candtemperedat220°C,thehardnessis53HRC,theimpacttoughness

is44J•cm2,therelativewearrateis0.62.Atthistime,themicrostructureislathlikemartensite,andthesurfaceisthewear

morphologywithmicrocutting.Thecontrasttestshowsthatithasexcell