准备工作:
首先要输入#ifconfig–a查看各网口的IP,然后根据IP做好规划(bootIP和stbIP必须是网卡上的且在不同网段的IP,需根据客户要求用#smittcpip配置各个网口上的IP。serviceIP和persistentIP在同一网段。即bootIP、stbIP、service和persistentIP这三个IP必须为不同网段的)
修改下/etc/hosts
172.16.0.80test1_boottest1
172.16.0.81test2_boot
172.16.1.80test1_stb
172.16.1.8
原创力文档

文档评论(0)