机械加工自由公差表实用版完整内容.docx

长度的选用值(GB/T1031-1995)2)轮廓算术平均偏差Ra

长度的选用值(GB/T1031-1995)2)轮廓算术平均偏差Ra的数值(GB/T1031-1995)(μm)第1系列0.012,0.025,0.050,0.1

0,0.20,0.40,0.80,1.60,3.2,6.3,12.5,25,50,100第2系列0.008,0.010,0.016,0.020,0.032,0.

,0.063,0.080,0.125,0.160,0.25,0.32,0.50,0.63,1.0,1.25,2.0,2.5,4.0,5.0,8.0,10.0,1

1.线性尺寸的极限偏差数