1-塑胶电镀工艺介绍.pptVIP

Inthedesignofthelineandforthebestmaintenanceoftheracks,astrippingtankisdesignedsidebysidetheplatinglinesothatrightafterunloading,therackisstrippedtoremoveanyplatingontheracks.Thiswillreduceunnecessarydragin,crosscontaminationandpoorplating.多层镍腐蚀机理14.)清洗及烘干-减少或去除铬镀液残留-使用DI水清洗-无污烘干15.)下挂及质检-全部工件均须目视检验-抽样性能测试--霍尔曼测试(FUHRMANN-Test)--电位差测试(Step-Test)--测厚--热冲击(+80°C/20°C)--冷热循环(+80°C/-40°C)--盐雾测试(CASS)16.)下挂及质检照片:镀完的工件16.)挂具