《JD-40型调度绞车的旋转底座设计》.doc

PAGE  PAGE 68 摘 要 本设计的主要目标是设计JD-40型调度绞车的旋转底座，就是将调度绞车的底座改为旋转底座，旋转底座的优点就在于它能够随着钢丝绳与绞车之间的角度的变化而旋转，避免堆绳，从而增加了绞车的传送效率。说明书对调度绞车进行了概述，介绍了国内外发展状况，阐述其应用领域，并通过传动比的分配，对传动系统的齿轮轴进行设计，然后对齿轮、轴进行校核，从而确定方案。 整个设计最重要的部分就是行星齿轮传动机构，传动稳定，传动效率高是它的优点，是同类型其他机构所不能相比的。从而使得调度绞车较为理想。 关键词 调度绞车 行星传动 旋转底座 理论计算 Abstract The main objective of this design is the design-based JD-40 rotary winch base scheduling，Scheduling winch is to rotate the base of the base change，the advantage of rotating the base is that it can with the winch rope and the angle between the changes in rotation，Reactor rope to avoid rope wrapped around，thereby increasing the transmission efficiency of the winch. First, an overview of scheduling winch，introduced the development situation at home and abroad, After their application on the field, And through the distribution of the transmission ratio, As well as gear, The gear shaft of the drive system design, And then on the gear, shaft to check, To determine program. The whole design is the most important part of planetary gear transmission, Transmission stability, Efficient transmission of the advantages is that it, Planetary gear transmission Is the same type can not be compared to other institutions of. Winch to make better scheduling. keywords scheduling winch planetary Gear rotating base theoretical calculation 目??? 录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc231813410 摘 要  PAGEREF _Toc231813410 \h I  HYPERLINK \l _Toc231813411 Abstract  PAGEREF _Toc231813411 \h II  HYPERLINK \l _Toc231813412 第1章 绪论  PAGEREF _Toc231813412 \h 1  HYPERLINK \l _Toc231813413 1.1 国内外调度绞车发展概况  PAGEREF _Toc231813413 \h 1  HYPERLINK \l _Toc231813414 1.2 研究目的和意义  PAGEREF _Toc231813414 \h 2  HYPERLINK \l _Toc231813415 1.3 该设计的创新之处  PAGEREF _Toc231813415 \h 3  HYPERLINK \l _Toc231813416 1.4 设计产品的主要用途和应用领域  PAGEREF _Toc231813416 \h 3  HYPERLINK \l _Toc231813417 1.5 JD－40型调度绞车工作原理  PAGEREF _Toc231813417 \h 3  HYPERLINK