宝钢热轧加热炉控制模型的开发.pdfVIP

宝钢热轧加热炉控制模型的开发 宝钢热轧加热炉控制模型的开发 吕立华 沈际海 邓 龙 张健民 （宝钢研究院自动化研究所，上海 201900 ） 摘 要 为了满足热轧生产的需求，加热炉模型控制需要不断的适应和优化。加热炉控制模型是加热炉过程控制 的核心，主要包括热跟踪模型、板坯温度预报模型、炉气温度设定优化模型、剩余在炉时间预报模型以及休止处 理模型等，这些模型进行组合对加热炉进行控制，满足板坯的加热质量、轧线生产节奏和节能的控制目标。本文 回顾了宝钢热轧加热炉控制模型的开发经历，叙述了加热炉模型控制模块的主要功能，给出热轧加热炉的一些优 化方法，优化的加热炉控制模型对提高板坯的加热质量和降低能源消耗具有明显的效果。 关键词 热轧 加热炉 控制模型 Reheating-furnace Control Model Development for Baosteel Hot Strip Rolling Plant Lv Lihua Shen Jihai Deng Long Zhang Jianmin （Research Institute, Automation Research Department, Baoshan Iron and Steel Cop., Ltd., Shanghai, 201900 ） Abstract It is necessary for re-heating furnace control model to adapt and optimize in order to satisfy the requirement of hot strip rolling production. Re-heating furnace control model is the core of the re-heating furnace process control, including heating tracking model, slab temperature forecasting model, air temperature optimal setup model retaining time model and pause model. Model control aim is to satisfy the quality of slab heating and mill pace and min energy. In this paper, the story of development in the re-heating furnace control model in hot rolling technology in Baosteel is reviewed. The main contents of re-heating furnace control model are specified. Some optimal methods are provided to be used Baosteel 2050 hot mill re-heating furnace. Application shows that good re-heating furnace control model can improve slab heating quality and decrease energy waste. Key words hot strip rolling ，reheating furnace ，control model 1 引言 加热炉自动烧钢控制系统是热轧生产的重要环节之一 ，其主要控制目的是：使加热炉内板坯按轧制节 奏移动和抽钢，满足后道工序的产量需求；通过合理的升温，使板坯在到达出炉位置时加热到目标出炉温 度、满足目标均热度等各种技术要求，保证加热质量；节约燃料，减少烧损。 加热炉能量消耗在整个钢铁行业中占有较大的比重，由