《胶版纸造纸车间的初步设计》.docVIP

摘 要 要完成了30t/日（70g/m2）ZW24型1760纸机，设计车速为200m/min。 为了便于纸机的运行，车间的设计采用了两层布置，面积为2991.4m2，其中长127.3m，宽18 m。 工艺方面，采用了20%麦草浆、30%阔叶浆和50%针叶浆三种原料进行抄造，并进行了打浆、AKD中性施胶、加填、和表面施胶等。 设计的总投资为3866.61万元，回收期为4.8年。 关键词：胶版纸 造纸车间 工艺平衡计算 车间平面布置 Introduction of Papermaking Workshop Producing the Offset Printing Paper (30T/D, 70g/m2) This design is about a papermaking workshop producing offset printing paper, with the base weight of 70g/m2, production 30 tons/day. It includes the demonstration of the production process, balance calculation of the pulp and water, balance calculation of heat, calculation of investment economy, drawing of the workshop arrangement, drawing of the producing process etc. The paper machine used in this design is 1760 paper machine, the designed paper machine speed is about 200m/min.. This papermaking workshop possesses a area of xxxxxx square meters, with xxx meters in length, xxxx meters in wide. Two lay arrangement makes it very convenient to run the paper machine. Bleached reed pulp and the bleached hard wood pulp is used in the making of the offset printing paper at the ratio of xxxx and xxxx respectively. The main producing process includes pulping, interior sizing with AKD, adding filler, surface treatment etc. The total investment of this paper producing line is xxxx, the recovered period is about 6 years. Keyword: offset printing paper, papermaking workshop, process balance calculation, drawing of workshop arrangement 目录 前言……………………………………………………………………………………………1 1.总论………………………………………………………………………………………3 1.2设计范围………………………………………………………………………………3 1.3设计指导思想………………………………………………………………………3 2.工艺论证及流程设计……………………………………………………………………4 2.1技术指标………………………………………………………………………4 2.2纤维原料的选择与配比………………………………………………………………5 2.3打浆工艺………………………………………………………………………6 2.3辅料的选择………………………………………………………………………7 2.3.1施胶剂的选择…………………………………………………………………7 2.3.2干强剂的选择………………………………………………………………8 2.3.3助留剂的选择………………………………………………………………8 2.3.4填料的选择………………………………………………………………8 2.3.5调色剂的选择………………………………………………………………9