CIBF2012-可充电池自放电确定的新方法.ppt

新型二次电池及相关能源材料的基础研究 CIBF2012 10th China International Battery Fair动力电池自放电测量新技术原理与应用 The New Technology Of Power Battery Self-discharge Measuring Principle and ApplicationHarbin University of Science and Technology ZEEMOOＬＩ　ＧＥＣＨＥＮ2012 . 06 . 20 ＳＨＥＮＺＨＥＮ 引 言 Introduction 1、动力电池组是串联充放电的, 电流相同。 Battery pack in series to charge and discharge, the same current. 2、电池组的不均匀性就只有是自放电差异性引起的。 The heterogeneity of the battery pack is only caused by the difference of self-discharge. 3、自放电是影响动力电池组使用寿命的重要因素。 The self-discharge is an important factor affecting the power battery service life. 1、通用的测量方法是：将电池充满电后，在常温下搁置28天或在高温下搁置7天，然后通过测量剩余电量的方法评估电池自放电。 General measurement method : When the battery is fully charged, set it aside at room temperature for 28 days or seven days at high temperatures, then assess the battery self-discharge by measuring the remaining capacity. 2、需很长的测试时间、大量的流动资金，大面积生产场地，涉及到安全性。 Take a long testing time, take up a lot of liquid funds, large area for production site, related to safety. 目 录 Contents 1、问题的提出 Background 2、自放电基本概念 The basic concept of self-discharge 3、自放电测量技术标准与现状 The standard and current situation of self-discharge measuring technology 4、自放电测量新原理研究探索 Study on the new principle of self-discharge measurement 5、自放电测量新原理技术应用与展望 Application and prospect of the new principle of self- discharge measurement 1、问题的提出Put forward the problem 1、电池组寿命主要因素，串联充放电、造成单体差别，原因是自放电。 Major factors in battery service life , charge-discharge in series, causing monomer difference, the reason is self-discharge. 2、高温环境应用，自放电大，安全隐患，主要原因自放电。 High temperature environment application, large self-discharge, potential safety hazard, the main reason is self-discharge. 3、电池管理系统设计，各种均衡方法的采用，原因都是自放电。 Battery management system design, using all kinds of equalization methods, the reason is self-discharge. 4、锂电池运输需补电30%，造成安全隐患，原因是自放电。 Tr