基于可压缩的硅光电子材料的半球形电子照相机.pptVIP

A hemispherical electronic eye camera based oncompressible silicon optoelectronics 基于可压缩的硅光电子材料的半球形电子照相机 Author Contributions designed the experiments. J.S…… performed the experiments and analysis. ，，J.S，Y.H and wrote the paper. Abstract In this paper, we introduce a means of producing curvilinear optoelectronics and electronic eye imagers that uses well-established electronic materials and planar processing approaches to create optoelectronic systems on flat, two dimensional surfaces in unusual designs that tolerate compression and stretching to large levels of strain .this feature enables planar layouts to be geometrically transformed to nearly arbitrary curvilinear shapes. Was it difficult?/yes The human eye is a remarkable imaging device, with many attractive design features. Prominent among these is a hemispherical detector geometry, similar to that found in many other biological systems, that enables a wide field of view and low aberrations . Unfortunately, existing technologies have been developed only for surfaces of rigid. the mechanical strains needed to accomplish the planar to hemispherical geometrical transformation greatly exceed the fracture strains of all known electronic materials. Was it useful?/yes The ability to implement 实施 electronic and optoelectronic（光电子的） systems on non-planar （非平面）surfaces could be useful not only for hemispherical cameras , but also for biological systems as monitoring devices（检测装置）, prosthetics（假肢） and so on. How to solve the problem? 1 将光电子电路做成超薄结构，采用不同寻常的二维可压缩构型 2 特殊设计的弹性元件将平面图案变为半球形。 using compressible silicon focal plane arrays and hemispherical, elastomeric transfer elements to fabricate electronic eye cameras. A transfer element fabricated 构造 in PDMS （硅氧烷 ）by casting（铸造） and curing（固定） against an appropriately designed template. Stretching in the radial（辐射状的） direction forms a flat drumhead（鼓膜） membrane in which all points in the PDMS are in tension. Lifting a prefabricated（预制） focal plane a