电视机遥控器前盖塑料成型工艺及模具设计毕业论文.doc

PAGE I 南 京 工 程 学 院 毕业设计说明书(论文) 专 业： 材料成型与控制工程（模具设计） 题 目：电视机遥控器前盖塑料成型工艺及模具设计 指导者： 评阅者： 2012年 6 月 毕业设计说明书（论文）中文摘要 电视机遥控器前盖塑料成型工艺及模具设计 本文主要介绍了电视机遥控器前盖塑料成型工艺及模具设计，根据ABS塑料成型的工艺特性和产品的使用要求，对产品进行详细的工艺分析，在设计工作前进行大量的资料搜集汇总，然后开始着手于模具设计。其中包括利用Pro/e软件绘制零件的三维图并由此进行3D开模、工件的工艺分析、注塑机的选用和校核、模具设计和确定了型腔的排布的难点，浇注系统的设计和模具总体结构。尤其详细介绍了型芯、型腔、推件装置等零部件的设计和制造。同时，并通过Mold flow模拟分析软件对变形、填充、浇口、排气、冷却、压力和注射成型时间等参数进行分析和优化，预测产品在成型过程中可能出现的问题。 关键词：电视机遥控器前盖；塑料模；模具设计；模拟分析； 毕业设计说明书（论文）外文摘要 Title Plastic forming technology and die design for television remote control the front cover Abstract: This text mainly introduced the injection mold design of television remote control the front cover. According to the fashioned processing property of ABS and the operating requirement of the product, the product was proceed detailed technical analysis. Before designing work headway to go a great deal of data collection to gather, then enter upon to design in the molding tool. Pro/e including the use of the software 3D rendering parts of the map and thus open for 3D model, the process workpiece, Injection Molding Machine Selection and Verification, mold design and difficult to determine the cavity of the arrangement, Gating system design and mold overall structure. Details on the core, cavity and pushing pieces of equipment, and other parts of the design and manufacturing . At the same time, and through Moldflow simulation software on the deformation, filling, gate, exhaust, cooling, pressure and time parameters of injection molding analysis and optimization, forecast products in the molding process problems that may arise. Keywords: Television remote control the front cover Plastic mould; Mold design; Mold flow PAGE I 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc326161067 前 言 PAGEREF _Toc326161067 \h 1 HYPERLINK \l _Toc326161068 第一章 塑料模具设计简介 PAGEREF _Toc326161068 \h 2 HYPERLINK \l _Toc3261