2011届本科生毕业论文（设计） 基于DSP的信号发生器的设计.docVIP

2011届本科生毕业论文（设计） 题目： 基于DSP的信号发生器的设计 作 者 姓 名： 学 号： 系 (院)： 机械与电子工程学院 专 业： 电子信息工程 指导教师姓名： 指导教师职称： 2012年 3 月 9 日 Year 2011 Bachelor Graduation assignment(Design) Title: Design of Signal Generator based on DSP Author: Tao Li-juan Student ID: 2007080305 Department: Mechanical and electronic engineering faculty Major: Electronic and information engineering Instructor: Wen Yan Professional Title: Lecturer MARCH 9, 2012 摘 要 阐述了基于TMS320V5402 DSP(以下简称C5402) 芯片实现信号发生器的设计方法和原理。首先介绍了实现信号发生器的几种算法及信号生成原理，接着阐述了系统的软件和硬件的设计。该信号发生器可以产生任意波形，且信号的幅度和频率可以由DSP程序控制。具有易于修改，灵活性强等优点。克服了通常信号发生器模式固定，波形不可编程的不足。该发生器满足信号发生器的小型化，低成本和方便使用发展趋势的需要，充分利用DSP信片的优点。这个设计的硬件部分有该DSP芯片和D/A转换芯片TLC7528组成，DSP芯片用于产生各种波形，D/A转换芯片用于把数字信号转换为模拟信号。在以上硬件的基础上，通过软件编程来实现三角波，方波和正弦波等波形。 关键词:数字信号处理器；信号发生器；D/A转换器；波形 ABSTRACT This paper expounds the design of signal generator based on TMS320VC5402DSP. First，several algorithms of signal generator reality and the principle of signal generation is introduced. Next，the hardware and the software design is discussed in paper .This signal generator can generate several waveforms，not only the voltage and the frequency of the signal are both controlled by DSP programs，but also it can be easily modified，more flexible and many other advantages. Therefore it improved the shortcoming of fixed pattern and waveform can not program. The generator signal generator to meet the miniaturization, low cost and easy to use development trend of the need to fully use the advantages of DSP signal . The hardware of this design is made by TMS320VC5402DSP C chip and D/A conversion chip TLC7528.DSP chip produce waves and D/A conversion chip is used change digital signals to analog signals. Based on the hardware, we use software to carry