高层滑模施工设计_毕业设计论文.doc

毕业设计论文 高层滑模施工设计 摘 要 高层建筑由于层数较多，竖向结构布置上下变化不大，特别是进入标准层后，结构施工工艺重复较多，而高层建筑多为高层住宅或写字楼，开发商迫于资金成本的原因而要求的工期特别紧，承建商也出于降低施工成本的目的而尽量加快施工进度、减少模板及外架的周转，而液压滑动模板施工技术是混凝土工程和钢筋混凝土工程中机械化程度高、施工速度快、场地占用少、安全作业有保障、综合效益显著地一种施工技术。因此这些机械化程度较高的连续成型施工技术，得到了广泛的推广和应用。 液压滑动模板施工的重点是抓住施工方案的选择、人员的组织培训、滑模装置组装与拆除、水平及垂直度的控制及纠偏、水平楼板交叉处的处理、以及安全质量等技术控制。在建筑施工中，脚手架用量大，使用时间长，费用高，要求安全、适用、经济。随着建筑形式的多样化，促使脚手架朝装拆简单，移动方便承载性能好，使用安全可靠的发展。 液压滑动模板施工技术作为新的施工技术，它不仅是技术的革新，更重要的是能带来成本的下降，质量与效益的提高。 关键词：液压滑动模板 设计 施工 经济效益分析  ABSTRACT High layer building because layer number than much, the construction arrange the top and bottom variety not very, especially enter the standard layer the empress, construction construction craft repetition than much,and the high layer building is much for the high layer residence or write floor, development the company force in the reason of the funds cost and request work period purpose for specially tightly, contractor too come forming lowering the construction cost but as far as possible and quickly start construction degree of progress, reduce a kind of construction technique for of turnover, but The liquid presses the glide formwork,an integral electric lifting scaffold start construction technique is concrete engineering with reinforced concrete engineering inside mechanizing the degree highly,start construction speed quickly, field ground take upping little,safe homework having guarantee, synthesizing the performance getting very bigly exaltation of template and outside .Therefore,these mechanize the higher consecution of degree the type’s construction technique,got the extensive expansion with apply. The point that The liquid presses the glide formwork start construction is the buildup of the choice, personnel to hold tight construction project training, slip the control and corrective of the level and perpendicular degree deflection, level floor the plank cross a technique control for of handing, and safe quantity. The liquid presses the glide formwork, an integral e