多孔钻削组合机床设计.doc

多孔钻削组合机床设计 摘 要 随着自动化生产能力的提高，现代工厂中出现需要 Porous drilling modular machine tool design Author:Zhou Da Tutor: Li Hui Abstrac With the improvement of automation production capacity, the modern factories in need of modular machine tool situation more and more, combination machine tools is based on common components, with a specific shape of workpiece and machining process design of the special parts and jigs, consisting of a special semi-automatic or automatic machine tools. It generally USES multiple spindle, knife, working procedure, polyhedral or transfer process at the same time, the production efficiency is higher than general machine tools several times or more. Because gm parts has standard combined seriation, can be flexibly configured according to need, to shorten design and manufacturing cycle. Combination machine tools, therefore, both the advantages of low cost and high efficiency, is widely used in the mass production, and can be used to form automatic production line. This topic for the gearbox shell on the end face 12 phi x 18 hole drilling this specific process and design of a dedicated vertical combination machine tools. In this design, on the basis of data calculation and careful selection of standard general parts, according to the structure characteristics of the processed parts, machining parts dimensional accuracy, surface roughness requirements, as well as the positioning clamping way, process method and tool adopted by the machining process, productivity, and cutting parameter conditions to design the reasonable structure of the spindle box. Keywords：Combination machine tools Spindle box The process flow drilling 目 录 1引言 1 1.1组合机床概述 1 1.2该课题研究的目的和意义 1 1.3组合机床发展史 1 1.4国内外该研究技术现状 2 1.5发展趋势 3 1.6本课题研究的基本内容 3 1.7本课题主要研究解决的难点问题和拟采用的办法 3 2 多孔钻组合机床总体方案设计 5 2.1 零件分析 5 2.2工艺分析 6 2.3确定机床的配置形式 6 2.4组合机床切削用量 8 2.5组合机床切削用量选择及计算 9 3 组合钻床总体方案设计 11 3.1被加工零件工序图 11 3.2 加工示意图 12 3.3 机床联系尺寸总图 16 3.4．生产率计算卡 18 4 组合机床多轴箱设计 20 4.1通用