基于PLC的电镀生产线监控系统设计课程设计1.docVIP

基于PLC的电镀生产线监控系统设计 摘 要 电镀行车生产线自动化结合其他行业自动控制技术的应用情况，提出了基于PLC的电镀行车自动生产线的设计，并通过应用机械、可编程序控制器(PLC)等多项专门技术开发的自动生产系统。本文首先分析和制定了该生产线的整体设计思想和方案，确保了该生产线系统具备真正的自动化生产能力且结构简单。李利用西门子PLC S7-200进行自动化电镀生产线控制，重点分析了系统软硬件设计部分，并给出了系统硬件接线图、PLC控制I/O端口分配表以及整体程序流程图等，实现了电镀生产自动化，提高了生产效率，降低了劳动强度。在该生产线的控制系统中，采用了高可靠性，高稳定性，编程简单，易于使用，而且广泛应用于现代工业企业生产线过程控制中的控制器PLC。详细分析了输送系统设备保护控制电动机原理图、程序框图、PLC系统外部接线图。分层次详细阐述了整个高度自动化输送系统的目标及功能，使高度自动化输送系统的结构更加清晰，层次更加分明，具有非常强的实用性。 关键词：自动电镀生产线；自动控制技术；可编程控制器（PLC）; 组态王 ABSTRACT Industry automate technology develop very fast fierce in recent years，As one of the three sllpport technologies in current industry automation，PLC is been subjected to with its very high dependable and anti-interference abjIitv greatly to welcome extensively,in the technology reformation process of every trade drive in large quantity applied. Industry automate technology js doubly a current realm which is subjected to concern conduct and actions a newly arisen edge academics realm，have booming source of vitalityinside this engineering realm,electroplate production is a Merytraditiona|Industry,the reality of lowly production rate and low—lying technology IeveI need urgently as to it’s take into a technology reformation．This text analyses how raise to electroplate automation JeveI of producing the realm，use PLC technology to contro|in each produce line．carrying on between severeI production Iines with each other allied according to the network．The thesis analyzed to electroplate the production condition of profession first，comparing the merit and shortcoming of a few in common use controJ strategies，gives concrete controI project，immediately analyzed and designed the network structure of the system also from work shop level．again carry on a thorough research for the controI Of equipments class，carried on a design at hardware and software two IeveI top’s controls to production Iine，finally carried on a design to the credibility of the system． Keywords：PLC，control，electroplatting，product line 摘 要 2