水稻植质钵育秧盘模具的总体设计毕业论文.doc

摘要 本论文包括植质钵育秧盘成型模具的设计、模具的应用两部分。 通过对传统的水稻栽植方式存在的缺点进行了剖析，传统水稻栽植时穴与穴之间的秧苗有盘根现象，插秧时也有较为严重的伤根现象，而钵育水稻育秧方式可避免盘根伤根现象，且能大大提高水稻的产量。通过植质钵育移栽，无需缓苗，较比普通育秧延长12-15天生长期，还实现了秸秆还田。 植质钵育秧盘成型模具的设计，是研制水稻钵育机械的一个组成部分。成型模具设计的一般步骤是：设计压缩成型成品件（秧盘）、选择压缩成型方案、选择压缩成型设备、模具结构设计、模具零件设计。通过对各步骤、模具的各种结构、模具的各种零件的分析，最终完成了秧盘成型模具的设计。 模具材料和热处理技术是影响模具质量、性能和使用寿命的关键因素，多数模具的早期失效，是由材料和热处理的因素造成的，所以需要正确选择模具材料和热处理工艺，来提高模具的使用寿命和使用性能。由于秧盘原料的粘性，脱模状况是模具的重要性能之一，也是影响制品质量的重要因素，所以有必要研究提高模具脱模性的方法。 关键词：模具；造型；植质钵育秧盘 Abstract The thesis includes two parts: the design on a modelling mould of vegetable matter seedling tray, the applicationt of model. Based on the traditional way of rice planting analyzes the disadvantages,Traditional rice planting with acupuncture point when the hole between seedling transplantation has weaved phenomenon.There are also serious injury root phenomenon, and port yukon rice seedlings mode can avoid pan-gen, root damage phenomenon, and can dramatically improve rice yield. Through the plant qualitative port yukon transplanting, without delay, than ordinary seedlings seedlings in extended 12-15 naturally long-term, but also achieving the straw counters-field. The design on a modelling mould of vegetable matter seedling tray is a part of study on mechance that used to breed rice in earthen bowl. The process of designing a mould is: design the production made from mould (seedling tray), chose the scheme of compression to shape seedling tray, chose the equipment of compression to shape seedling tray, design the structure of mould, design the parts of the mould. In the end I finished the design on a modeling mould of vegetable matter seedling tray on bases of analysis about every process, every structure of mould, every part of mould. The material of mould and heat treatment technology are key factor that influence mould quality and capability and use life-span. The forepart lapse of many mould is because of material and heat treatment, so it is necessary to chose material and heat treatment techni