纳林庙煤矿石湾子三井安全工程设计 安全工程毕业设计.docVIP

摘 要 本次安全设施设计的目的是通过对本矿井的安全条件进行评价，提出可行的安全防范措施，提高矿井安全生产水平。其中包括矿井通风、粉尘危害防治、瓦斯危害防治、防灭火、矿井防治水、其它井下灾害预防、矿井安全监测监控、矿井安全检测及其它装备和矿山救护队设计等。 设计矿井通风采用中央并列式，采用抽出式通风系统，在回风井口设置主扇。矿井防尘供水系统采用静压供水，并采取了有效的减尘、降尘、清尘措施，并设置了完善的隔爆、抑爆设施；矿井防灭火系统采用注氮防灭火系统，并配备束管监测系统；煤矿配备了KJ110型安全生产监测监控系统，采取防止瓦斯聚集、引燃措施，预防瓦斯爆炸；回风井口设有防爆门，可防止灾害事故的扩大。 关键词：安全生产、防范措施、通风系统、防灭火、监测监控 Abstract The purpose of the design of safety devices is the safety of the mine to evaluate the conditions, safety precautions and put forward feasible measures to improve the safety production levels of mine. Including mine ventilation and dust hazard prevention and control, hazard prevention and control of gas, fire prevention, mine prevention and treatment of water and other underground hazards prevention, monitoring of mine safety monitoring,safety detection and other mine equipment and mine rescue teams design and so on. The design of mine ventilation put to use central parallel, The design used Extract ventilation system and Set the main fan in Back to the wind wellhead; mine dust-proof and water supply system adopt static pressure water supply and take effective by dust, dustfall, dust clearance measures and set up a perfect Flameproof , explosion suppression facilities; mine fire control system use nitrogen injection, and monitor the use of Beam Tubes control system; KJ110 type is equipped with a coal mine production safety monitoring system, measures to prevent from accumulation of gas, fire measures to prevent from gas explosion; return air Wellhead with explosion-proof doors to prevent from the expansion of disasters. Keywords: Production safety，preventive measures, ventilation, fire prevention, monitoring and controlling 目 录 摘 要 I Abstract II 前 言 1 第一章 矿井概况及安全条件 4 1.1井田概况 4 1.1.1地理位置及交通 4 1.1.2地形地貌 4 1.1.3水 系 4 1.1.4气象及地震 4 1.1.5其他自然灾害 5 1.1.6矿井开发简史及周边煤矿 5 1.1.7供电及通信 6 1.1.8供水水源 6 1.2安全条件 6 1.2.1地质特征 6 1.2.2地质构造 7 1.2.3煤层及煤质 7 1.2.4瓦斯、煤尘和煤的自燃 10 1.2.5水文地质 11 1.2.6工程地质 13 1.2.7资料存在问题 13 1.3矿井设计概况 14 1.3.1工程性质 14 1.3.2井田开