HAPSITE_ER_高级操作培训.ppt

Blank Subtraction- Analyze 空样扣除-分析 When a blank has been run, (Zero) will appear next to the method 当空样已运行时, 紧挨着方法将出现 (零) Blank Subtraction- Analyze 空样扣除-分析 To run the Analyze method minus the blank, touch SET TO RUN 要运行分析方法减空样, 触摸设定于运行 Blank Subtraction- Analyze 空样扣除-分析 Touch RUN ANALYZE 触摸 运行分析 Blank Subtraction- Analyze 空样扣除-分析 Look at the TIC to verify that the blank has been subtracted 查看 TIC, 证实空样已被扣除 Communication 通讯 Wireless Radio Communication 无线通讯 Adding a HAPSITE to the Laptop 添加 HAPSITE 至计算机 HAPSITE Sensor Icon Legend HAPSITE 传感器图标图例 Wireless Radio 无线通讯 The HAPSITE can be connected to the laptop using a wireless signal or a crossover cable 用无线讯号或交叉电缆, 可将 HAPSITE 连接计算机 To use the wireless connection: 为使用无线连接: Open the front panel打开面板 Unscrew the silver cover 拧下银色盖 Turn counter-clockwise 逆时针方向旋转 Wireless Radio 无线通讯 Press the button until a click is heard 按下按钮直到听见咔哒声 The Radio and WLAN lights will illuminate Radio 和 WLAN 灯将亮 It may take a few seconds for the green lights to appear 等待数秒钟, 绿灯亮 Screw on the cover 拧上盖 Turn clockwise 顺时针方向旋转 Crossover Cable Option 交叉电缆选件 The crossover cable can be yellow or black 交叉电缆可黄色或黑色 The Smart Plus cable is plugged into the port next to the Air Probe Smart Plus 电缆插入紧邻空气探头的插口中 The ER cable is plugged into the top back corner of the unit ER 电缆插入仪器的后上角 Adding a HAPSITE to the Laptop添加 HAPSITE 至计算机 The laptop can be configured to run with a different HAPSITE 计算机可配置于与不同的 HAPSITE 一起运行 Advanced User function 高级用户功能 Each HAPSITE has a unique number 每台 HAPSITE 有独特的编号 Enter this number into ER IQ/Plus IQ to establish communication 将这个编号输入 ER IQ/Plus IQ,