冷变形和再结晶退火对TP304钢晶粒度的影响.pdfVIP

35 3 Vol35 No3 2010 3 HEAT TREATMENT OF METALS M arch 2010 TP304 1 2 1 1 1 , , , , ( 1. 武汉大学动力与机械学院, 湖北武汉 430072; 2广东电网公司电力科学研究院, 广东 广州 510600) : T 304 19% 25% , 650 700 800 900 30 m in, T 304, T 304 650 700 800 30 m in, ; 900 30 m in, ; 19% + 900 30 m in, T 304 40 m 22 m; 25% + 900 30 m in, T 304 40 m 17 m, 6 8, 25% + 900 30 m in : T 304; ; ; : TG1117 : A : 0254-6051( 2010) 03-0017-03 Influence of cold deformation and recry tallization annealing on grain ize of TP304 teel 1 2 1 1 1 WANG Zhi-wu , HU ing, SH I Bao-liang ,WU Y-iw ei, ZHANG Jun ( 1School of ow er and M echan ical Engineering,W uhan University,W uhan Hubei430072, China; 2Electrical ow erResearch Institu te of Guangdong ower Grid Corporation, Guangzhou Guangdong 510600, Ch ina) Ab tract: Influence of the deform ation rate and recrystallization annealing temperature on grain size of T 304 steeltreatedw ith 19% and 25% deform ation rate and recrystallizated by annealing at 650 , 700 , 800 and 900 for 30 m in, was researchedThe results ind icate that the comp lete recrystallization is not obtained after annealing at 650 , 700 and 800 for 30 m inHow ever, the comp lete recrystallization m icrostructure is obtained at 900 The average grain size of T 304 steel treated by annealing at 900 and 19% deform ation rate is refined from 40 to 22 mWhereas the average grain size treated by annealing at 900 and 25% deform ation rate is decreased from 40 to 17 mThe grain of T 304 steels treated by the two processes is refined from grade 6 to grade 8, the best grain refinem ent process is by