CA6140卧式车床数控化改造设计—横向进给系统设计.docVIP

毕业设计说明书（论文）中文摘要 如今科学技术发展很快，特别是微电子技术和计算机技术的发展更快，应用到数控系统上，它既能提高机床的自动化程度，又能提高加工精度，所以最经济的办法就是进行普通机床的数控改造。 本文主要是采用微机数控技术对最大加工直径为400mm的普通卧式车床进行改造设计。首先对卧式车床的改造任务和功能需求进行了认真分析，其次确定了普通卧式车床数控改造的总体方案，包括主传动系统的改造方案、换装自动回转刀架、螺纹编码器的安装方案、进给系统的改造与设计方案。最后经过计算切削力、滚珠丝杠设计计算、齿轮及转矩有关计算对丝杠、齿轮等进行了选型，详细设计出了横向进给系统。 关键词 数控技术 改造设计 横向进给 车床 毕业设计说明书（论文）外文摘要 Title Design of Horizontal Machine based on Numerical Control Technology --Design of Lateral Feeding System Abstract Today, rapid development of science and technology, especially micro-electronics technology and computer technology have expanded rapidly, and applied to the numerical control system, it can increase the degree of automation, machine tools, can improve the machining accuracy, so the most economical way is to carry out general transformation of the NC machine tool. In this paper, using computer numerical control machining technology to the maximum diameter of 400mm for the general transformation of the design of horizontal lathe. First of all, the transformation of the horizontal lathe tasks and functions carried out a careful analysis of needs, and secondly to determine the general horizontal lathe CNC overall transformation program, including the main drive system of the transformation program, installed automatic rotary tool, the installation of encoder thread program, the transformation of feed system and design. Finally, after calculating the cutting force, ball screw design, the gear and the calculation of torque on the screw, gear selection, etc., the detailed design of a horizontal feed system. Keywords CNC technology Transformation design Lateral feed Lathe  目 录 1 绪论 1 1.1 国内外数控机床的发展 1 1.2 机床进行数控化改造的意义 2 1.3 机床数控化改造的设计任务 3 2 总体方案的确定 4 2.1 主传动系统的改造方案 5 2.2 换装自动回转刀架 6 2.3 螺纹编码器的安装方案 7 2.4 进给系统的改造与设计方案 7 2.5 数控系统部分设计 8 3 横向进给系统的改造设计 10 3.1 横向进给系统的设计与计算 10 3.2 数控车床的传动装置设计 16 3.3 自动转位刀架的设计 22 4 微机数控部分设计 25 4.1 概述 25 4