“微机原理与接口技术”课程优生免考.docVIP

“微机系统设计与应用”课程 项目设计总结报告 项目名称： LED照明灯的驱动与控制系统设计 指导老师： 王晓萍 项目成员: 黄寒璐 丁涧 学 号： 3100102840 3100102849 专业年级： 光电信息工程 结题时间： 2013年 6月  LED照明灯的驱动与控制系统设计 浙江大学光电系，黄寒璐，丁涧 摘要：随着大功率LED技术工艺的成熟，LED已被越来越多地应用于照明光源。LED灯的寿命对于LED的应用具有重要意义。由于LED寿命与工作温度（结温）直接相关，因此我们设计了一套LED照明监控系统来实现LED工作温度的监控。本项目以C8051F020单片机为核心，采用PWM方式恒流驱动LED，实现了LED工作温度过高时自动降温，LED光通量、工作温度、驱动电流数据采集，LCD液晶屏实时绘制曲线，键盘控制LED亮度，RS232通信口远程控制LED、接收数据并绘制曲线等功能。该系统具有功能明确、操作简单、LED温控灵敏、成本低和性能可靠等优点。文章将从项目的总体结构设计，软件和硬件设计方法，程序测试结果和功能实现情况等方面进行详细阐述，最后分享整个系统开发过程的心得和体悟。 关键词： LED照明灯 温度监控 光通量 驱动电流 RS232通信 Design of Drive and Control System for LED Lighting Huang Hanlu，Ding Jian Department of Optical Engineering, Zhejiang University, Hangzhou 310027,China； Abstract: With the maturity of the high power LED technology, LED has been increasingly applied as lighting source. The lifetime of LED is important to its application. However, LED lifetime depends directly on operating temperature (junction temperature). Therefore, we have designed a lighting control system for LED that can monitor the operating temperature of LED. This project is such a system based on C8051F020 single chip and PWM to drive the high power LED with constant current that can automatically lower the heat when operating temperature exceeds the threshold level, gather data on luminous flux, operating temperature and drive current of LED, draw curves by LCD Screen, control LED light intensity with keyboard, control LED, receive data and draw curves by RS232. The system has clear defined function, simplicity of operation, sensitive control of temperature, low cost and reliability. The paper will state the whole system of program, software and hardware design, function realization as well as some experience and thoughts of the program. Key words: LED lighting; temperature control; luminous flus; drive current; RS232 communication 目录 1. 概述 3 2. 设计内容与预期目标 3 2.1 设计内容 3 2.2 预期目标 4 3. 总体结