基于CADCAM地打蛋机左壳注塑模具.doc

毕 业 设 计 题 目： 打蛋机左壳注塑模具CAD/CAM 学院： 专业： 机械设计制造及其自动化 学生姓名： 摘??要 ?注射成型是热塑性塑料成型的主要方法之一，可以一次成型形状复杂的精密塑件确定了分型面、浇注系统等，选择了注射机，计算了成型零部件的尺寸。采用侧浇口利用直导柱导向，推杆顶料,斜顶杆完成脱模对模具的材料进行了选择如此设计出的结构可确保模具工作运用可靠。最后对模具结构与注射机的匹配进行了校核并用绘制了一套模具装配图和零件图Beat-egg machine left shell injection mold CAD/CAM Abstract：Injection molding is one of the main methods of thermoplastic plastic molding, molding can be a complex shape of precision plastic parts. This topic is to beat egg machine left shell as a design model, the injection mold-related knowledge as the basis, the plastic injection mold design process.Through the correct analysis of workpiece, a pair of mould with two cavities was designed. The parting surface, gating system have been determined, the choice of injection machine, has calculated the formation spare part size. The side gate, using straight guide column, putting the material, inclined push rod and spring completed stripping and material of the mould were researched. So the structure is designed to ensure reliable mould work. Matching the mold structure and the injection machine was checked, and a set of CAXA drawing die assembly drawings and part drawings. Keywords:?plastic?mold;?injection?molding;?mold?design.  目录 摘要···························Ⅰ Abstract······························Ⅱ 第一章 绪论·····························1 1.1 引言·····························1 1.2 模具的发展现状和发展方向··················2 1.2.1 国内外注塑模具的发展现状················2 1.2.2国内外注塑模具的发展趋向················3 1.3 本课题的内容和具体要求···················3 1.3.1 本课题的内容······················3 1.3.2 本课题的要求······················4 第二章 塑件成型的工艺性分析·····················5 2.1 塑件的分析·························5 2.2 ABS主要性能·························5 2.3 ABS的注塑成型过程及工艺参数·················6 第章 第章 五章 成型零件结构设计影响塑件尺寸精度的因素模具成型零件的工作尺寸计算6.1 导向机构的作用和设计原则 6.2 导柱、导套的设计6.3 脱模机构的确定6.3.1顶