出租车计费器的外文翻译.docVIP

附录A 外文翻译（原文部分） Abstract: The composition and the Taxi Accounting System Principle, EDA platform outlined in the form of the digital system with a single CPLD design and implementation process. Paper models modules, including process modules, Billing module decoding dynamic scanning module design methodologies and techniques. Keywords: Taxi-Meter CPLD/PPGA hardware description language software MAX + PLUS Digital System With the rapid development of EDA, electronic systems design techniques and tools has undergone a profound change, The emergence of large-scale programmable logic device CPLD, a lot of convenience to the designers. Use it for product development, not only low cost, short, high reliability, but also the complete IPR. This paper introduces a EPM7128SLC84-15 Altera programmable logic chip as the core, Additional certain external circuit composed of Taxi Accounting System. 1 system components Taxi-Meter based on the composition of the CPLD as shown in figure 1. Some of the main functions are as follows : (1) A counter to count the pulse signal sent by the wheel sensors (each turn round to send a pulse). Different models may not be the same diameter of the wheel, through the one set up models make a choice. realization of the different diameter wheel to adjust the car. (2) B-100 pulse counter to the accumulation and the number of decimal km to the actual output decoding dynamic scanning module. Send a pulse to the expiration of every 500 C counters. Provision 2 started to realize a few kilometers prefabricated. (3) The C variable step Counter (price adjusted) cumulative count, a 500-meter Billing. Set up three super price increases to complete, starting prefabricated so. (4) Decoder / dynamic scanning distance with the cost will be after the dynamic numerical decoding digital scanning tube-driven approach. (5) LED display will be four kilometers and accounting rates with LED Display (three integer and one decimal). 2 module design Taxi-Meter from the