100×250复摆颚式破碎机偏心轴受力分析与研究.pdfVIP

中国科技论文在线 100 ×250 复摆颚式破碎机偏心轴受力分析 与研究 党章，罗会信** 5 （武汉科技大学机械自动化学院，武汉 430081） 摘要：用解析计算方法得到MPE-100 ×250 复摆颚式破碎机偏心轴应力曲线，对该机型有限 元模型施加解析算法用的简化载荷，数值计算的结果与理论计算结果相近，证明了数值计算 模型的可信性。将施加在动、静颚板上的集中力更新为更能模拟其实际受力情况的线性压力 载荷，并计入整机重力作用，得出偏心轴更为真实的力学参数曲线。使用曲线拟合工具Matlab 10 对最大应力曲线进行多项式拟合，为设计者提供有利的参考数据。 关键词：复摆颚式破碎机；解析计算； 数值计算； 多项式拟合 中图分类号：TD4 Stress analysis and research on eccentric shaft of 100*250 15 Compound Pendulum Jaw Crusher Dang Zhang, Luo Huixin (School of Machinery Automation, Wuhan University of Science and Technology, WuHan 430081) Abstract: The eccentric shaft’s stress curve of 100*250 compound pendulum jaw crusher was 20 obtained by analytical calculation method. Loading the simplified load on the FEA model,the numerical results and the theoretical calculation results are closer to each other,proofing the credibility of the numerical calculation model. Changed the concentrated force into pressure,loading on the surface of crusher jaw plates,and took the gravity into account,concluded more real mechanics parameters curves of eccentric shaft.A polynomial,simulating the maximum 25 stress curve was built by curve-fitting tool Matlab,which providing the designer favorable reference data. Keywords: Compound Pendulum Jaw Crusher; analytical calculation; numerical calculation; Polynomial fitting 30 0 引言 MPE-100 ×250 复摆颚式破碎