基于修正单层梁理论的夹层梁最大弯曲正应力计算.pdfVIP

第35卷摇 第1期 摇 摇 摇 包 装 工 程 摇 摇 2014年01月 摇 摇 摇 摇 PACKAGING ENGINEERING 摇摇摇 69 基于修正单层梁理论的夹层梁最大弯曲正应力计算 1 1,2 1,2 吴新凤 ,郝景新 ,刘文金 (1.中南林业科技大学,长沙410004;2.湖南省家具家饰工业设计中心,长沙410004) 摘要: 目的摇 计算夹层梁横截面的最大弯曲正应力。 方法摇 将夹层梁等效成等截面均质单层梁,进而 推导出了理论计算公式,并在此基础上进行了三点弯曲试验的算例研究。 结果摇 当破坏载荷与夹层 梁横截面的尺寸一定时,随着芯层与总厚度比的增加,修正单层梁理论计算的最大正应力值逐渐增 加,而单层梁理论计算的结果为恒定值。 对于同样结构的夹层梁,随着芯层弹性模量与表层模量比的 增加,修正单层梁理论计算的最大正应力与单层梁理论的差异值越来越小。 结论摇 修正单层梁理论 与层合梁理论计算的结果是一致的,该方法可有效进行最大弯曲正应力的预测与计算。 关键词:夹层梁;弯曲正应力;单层梁理论;弯曲特性 中图分类号:TB487;TB482摇 摇 摇 文献标识码:A摇 摇 摇 文章编号:1001-3563(2014)01-0069-04 Calculation of Maximum Bending Normal Stress for Sandwich Beam Based on Revised Single Layer Beam Theory 1 1,2 1,2 WUXin-feng ,HAOJing-xin ,LIU Wen-jin (1.Central South University of Forestry and Technology,Changsha410004,China; 2. Hunan I.D. Center of Furniture and Furnishing,Changsha410004,China) ABSTRACT:Objective To set up maximum bending normal stress equation for sandwich beam. Methods New methodology was proposed based on the equivalent singlelayer beamtheory,after that thenumerical exampleswere demonstrated according to three point flexural test. Results When the cross section of beam and the maximum loading were fixed,the maximum ben鄄 ding normal stress calculated by Revised single layer beam theory (RSLBT)was increased accordingly with increasing ratio of core thickness to thewhole,whereas thecalculationresultwasaconstantusingtheSinglelayerbeamtheory (SLBT). Inaddi鄄 tion,for thesamesandwichconstruction,thedifferencebetweenRSLBT andSLBTbecamesmallerwithincreasingratioof core mo