公路铣刨机整机的设计说明书.docVIP

摘 要 Abstract With rapid advances in municipal roads and the construction of high-grade highways, mass maintenance time has come. As road maintenance and recycling equipment of main machine kind of pavement milling machine is one of a growing source of concern for experts of road maintenance and construction units. Cold milling machine is a high performance pavement maintenance equipment, with low cost, wide range of milling depth and does not pollute the environment and so on. Mainly used for common disease of large area of broken pavement milling, milling picking jobs in flat trim as well as pavement. Road milling machine milling rotor are the main working device, evenly milled rotor layout arranged in a symmetrical helical milling cutters. Rotor is based on vertical and horizontal milling feed work in two ways. Pavement milling planing machine to work speed forward mobile, milling planing rotor rotating uniform distribution Yu drum Shang and by spiral arranged of milling Shaver, milling Shaver order contact pavement, pavement material in milling planing rotor tool of impact and extrusion Xia broken for particles shaped; while is spiral shaped symmetric arranged of tool will milling Xia of waste to rotor Central gathered, through throwing material Board will waste throwing to conveying machine Shang, and transfer to specified location and transport vehicles Shang. The design specifications, including the the overall programme, power and design of the planetary gear reducer, mechanism design, milling parts design, design of the feeding device, and pavement milling machine technology trends and market prospects of doing a simple introduction. Supporting the use of these instructions with drawings. Keywords: milling planer ;planetary reducer ;track ;transporting machine ;tool 目 录 摘 要 III Abstract IV 1 绪论 1 1.1路面铣刨机及其发展概况 1 1.1.1路面铣刨机的分类 1 1.1.2路面铣刨机的应用特点 2 1.1.3 路面铣刨机的主要结构及工作原理 2 1.1.4 国内外路面铣刨机发展概况 3 1.2 路面铣刨机设计的指导思想 5 1.3 路面铣刨机设计的设计