皮圈架座组合机床及专用夹具设计说明书.docVIP

摘 要 随着自动化应用的逐步提高，组合机床越来越多的出现在现代工厂中，组合机床是以通用部件为基础，配以工件特定外形和加工工艺设计的专用部件和夹具，组成的半自动或自动专用机床。它一般采用多轴，多刀，多过程，多方位多站同时处理方法，生产效率高，比一般机器几个几倍到几十倍。作为合作的通用部件已经标准化系列，可灵活配置，可缩短设计制造周期。因此，组合机床在大规模生产的低成本和高效率的优点相结合，已被广泛地使用，可用于形成自动生产线。 本次设计为皮圈架座钻孔专用机床，同时完成3个孔的加工。主要有以下几个方面： （1）制定工艺方案。了解被加工零件的加工特点、精度和技术要求、定位夹紧情况以及生产率的要求等。确定在组合机床上完成的工艺内容及其加工方法。这里要确定加工工步数，决定刀具的种类和型式。 （2）机床结构方案的分析和确定。根据工艺方案确定机床的型式和总体布局。在选择机床配置型式时，既要考虑实现工艺方案，保证加工精度、技术要求及生产效率；又要考虑机床操作、维护、修理是否方便，排屑情况是否良好。 （3）组合机床总体设计。确定机床各个部件间的相互关系，选择通用部件和刀具的导向，计算切削用量及机床生产率。绘制机床的总联系尺寸图及加工示意图等。 关键词：组合机床；多轴箱；三图一卡；夹具设计 Abstract With the gradual improvement of automation, machine tool more and more in modern factories, machine tool based on common components, together with the specific shape of the workpiece and process design special parts and fixtures, composed of semi-automatic or automatic dedicated machine. It is commonly used multi-axis, multi-tool, multi-process, multi-faceted or multi-station processing at the same time, the production efficiency several times or more higher than the general machine. Common components have been standardized for serialization, can be flexibly configured, you can shorten the design and manufacturing cycle. Therefore, the combination of machine combines the advantages of low cost and high efficiency has been widely used in mass production, and can be used to form an automatic production line. The design for the apron mountings drill special machine tools, completed three hole machining. Mainly the following aspects: (1) to develop a process plan. Learn about the processing characteristics of the machined parts, precision and technical requirements, the positioning clamping and productivity requirements. Determine the combination of machine tool technology content and its processing method. To determine the number of processing steps, determine the type of tool and type. (2)Machine analysis of the structure of the program and OK. According to the technical program to determine the type