硕士学位论文：复杂空间管道系统动力特性分析与实验验证.docVIP

中图分类号: V231.96；O322 论文编号 082304 硕士学位论文 复杂空间管道系统动力特性分析与实验验证 研究生姓名 杨飞益 学科、专业 载运工具运用工程 研究方向 管道振动 指导教师 陈 果 教授 南京航空航天大学 研究生院 民航学院 Nanjing University of Aeronautics and Astronautics The Graduate School College of Civil Aviation Dynamic Analysis of Complex Spatial Pipeline System and its Experimental Verification A Thesis in Vehicle Operation Engineering Engineering by Yang Feiyi Advised by Prof. Chen Guo Submitted in Partial Fulfillment of the Requirements for the Degree of Master of Engineering March, 2012  承诺书 本人郑重声明：所呈交的学位论文，是本人在导师指导下，独立进行研究工作所取得的成果。尽我所知，除文中已经注明引用的内容外，本学位论文的研究成果不包含任何他人享有著作权的内容。对本论文所涉及的研究工作做出贡献的其他个人和集体，均已在文中以明确方式标明。 本人授权南京航空航天大学可以有权保留送交论文的复印件，允许论文被查阅和借阅,可以将学位论文的全部或部分内容编入有关数据库进行检索，可以采用影印、缩印或其他复制手段保存论文。 (保密的学位论文在解密后适用本承诺书) 作者签名： 日 期： ABSTRACT Pipeline is considered as one of the five main modern transport methods. And it has a wide range of applications in the aerospace, water conservancy, mechanica, architecture, chemical industry, nuclear industry,etc.Because of the severity of pipeline failure, it shows great significance of the study of dynamic characteristics of the pipeline. In this paper, a pipe of a hydraulic test-bed and a complex spatial piping system test-bed are set for the research.Their dynamic models are established respectively to find the vibration mechanism and the dynamic characteristics of spatial pipeline.And verify them with the experimental method.Finally,several factors are researched on how these factors effect on the vibration mode and the maximum stress of the pipe. The main research contents are as follows: Firstly, the Pro-E software is used to establish the model of the pipe of a hydraulic test-bed which can be sent to the finite element software Ansys Workbench to do modal analysis, and the nature frequencies and corresponding mode shapes are achieved. Secondly, the hammering method is used along three directions to carry out the experimental modal analysis