采用优化的高温轧制工艺（OHTP）生产西气东输二线用X80.pdfVIP

采用优化的高温轧制工艺（OHTP ）生产西气东输二线用X80 管线钢钢板 聂文金，王志福，李冉，刘朝霞，张晓兵 江苏沙钢集团，中国江苏 215625 摘要 针对西气东输二线项目用厚壁 X80 管线钢的技术要求和沙钢炼钢和轧钢的技术装备条件，沙钢开发了 HTP-TMCP 相结合的 OHTP 工艺，并应用该工艺生产约 2000 吨的 22mm 厚 X80 钢板，完成了约 150 支直 缝钢管的制管试验。试验结果表明，OHTP 钢无论力学性能、－15℃落锤性能，还是 JCOE 制管后的管体 屈强比均比 HTP 钢有明显改善。22mm 厚 OHTP X80 钢板－80℃下的 Charpy 冲击试验的吸收能仍处于上 平台,CVN 大于 270J ，50 ％FATT 值低于－100℃，－30℃下的DWTT 落锤试验的断口剪切面积率为 90 ％， 85 ％BDWTT 值为－34℃。大量试验结果说明 OHTP 钢具有优良的低温韧性，完全满足西气东输二线项目 对大壁厚 X80 管线钢热轧钢板的技术要求。 关键词：X80 管线钢，宽厚板，OHTP The Production of X80 Pipeline Steel Plate For the Second West-to-East Natural Gas Transmission Pipeline with Optimized High Temperature Process (OHTP) Wenjin Nie, Zhifu Wang, Ran Li, Zhaoxia Liu, Xiaobing Zhang Jiangsu Shagang Group, Jiangsu, China 215625 Abstract According to the technical requirements of X80 heavy thickness steel plates for the second west-to-east natural gas transmission pipeline project and the technology capability of steelmaking and plate mill in Shagang, an optimized high temperature process (OHTP) was developed with combining HTP(High Temperature Processing) and TMCP(Thermo-Mechanical Controlled Processing). OHTP was applied in production of 2000 tons of X80 steel plate with 22mm thickness, in which has been used for the LSAW JCOE pipe manufacturing test of 150 pieces of 22mm ×Ф1219mm pipes in Julong Steel Pipe Co. Ltd. The results show that the mechanical properties, DWTT properties at -15 ℃ of plates and the yield/tensile ratio of the pipes, are improved. The absorb energy of Charpy impact test at -80℃remains at its top platform above 270J, the 50% FATT is below -100 ℃. At -30℃, the DWTT fracture shear area is 90 ％, and 85 ％BDWTT value is at -34 ℃. A numbe