芯片ICM7217外文资料翻译（原文+译文）.docVIP

外文资料原文 The chip ICM7217 Features ? Four Decade, Presettable Up-Down Counter with Parallel Zero Detect ? Settable Register with Contents Continuously Compared to Counter ? Directly Drives Multiplexed 7 Segment Common Anode or Common Cathode LED Displays ? On-Board Multiplex Scan Oscillator ? Schmitt Trigger On Count Input ? TTL Compatible BCD I/O Port, Carry/Borrow, Equal, and Zero Outputs ? Display Blank Control for Lower Power Operation; Quiescent Power Dissipation 5mW ? All Terminals Fully Protected Against Static Discharge ? Single 5V Supply Operation Description The ICM7217 is a four digit, presettable up/down counter with an onboard presettable register continuously compared to the counter. The ICM7217 is intended for use in hard-wired applications where thumbwheel switches are used for loading data, and simple SPDT switches are used for chip control. This circuit provides multiplexed 7 segment LED display outputs, with common anode or common cathode configurations available. Digit and segment drivers are provided to directly drive displays of up to 0.8 inch character height (common anode) at a 25% duty cycle. The frequency of the onboard multiplex oscillator may be controlled with a single capacitor, or the oscillator may be allowed to free run. Leading zeros can be blanked. The data appearing at the 7 segment and BCD outputs is latched; the content of the counter is transferred into the latches under external control by means of the Store pin. The ICM7217 (common anode) and ICM7217A (common cathode) versions are decade counters, providing a maximum count of 9999, while the ICM7217B (common anode) and ICM7217C (common cathode) are intended for timing purposes, providing a maximum count of 5959. This circuit provides 3 main outputs; a CARRY/BORROW output, which allows for direct cascading of counters, a ZERO output, which indicates when the count is zero, and an EQUAL output, which indicates when the count is equal to the value contain