文献翻译-ADVISOR 使用说明.docVIP

附 录 ADVISOR Documentation 3.1 ADVISOR file structure 3.1.1 File interactions data flow The above schematic represents data flow in the ADVISOR file system. The four main agent types are: Input Scripts define variables in the workspace and/or call other input scripts. An example is MC_PM32.M. Block Diagrams are Simulink files containing the equations used to compute outputs such as fuel use from inputs such as an engine map. They are the models. One example is BD_PAR.MDL. Output Scripts post process the model outputs by querying the workspace. These may include plotting routines or error checking routines. chkoutputs.m is an example. Control Scripts may both develop inputs and process outputs. Examples include the ADVISOR GUI and optimization routines. 3.1.2 File locations The main ADVISOR directory (e.g. c:\ADVISOR or c:\Program Files\ADVISOR) contains several sub directories.? Among these are the data, GUI, and models directories that contain the corresponding files. 3.1.3 File naming conventions All model and data files use a prefix followed by an underscore (‘_’) that is the same as the prefix used for (nearly all of) the variables it defines, which in turn is in pointy brackets () at the end of the Simulink block in which those variables are used. Here are ADVISOR’s component file types: ACC_*.M Accessory load files CYC_*.M Driving cycle files, which define variables starting with cyc_, used in the block labeled cyc ESS_*.M Energy storage system data files, which likewise define variables starting with ess_, used in the block labeled ess EX_*.M Exhaust after treatment files (such as catalysts) FC_*.M Fuel converter data files TX_*.M Transmission data files (these include gearbox-gb and final drive-fd variables) GC_*.M Generator/controller data files MC_*.M Motor/controller data files PTC_*.M Powertrain control data files, which define engine control, clutch control, and hybrid control strategy variables starting with vc_ and cs_, used in blocks