放大镜注塑模具设计（全套CAD图纸）.doc

买文档后送图纸，QQ 194535455 摘 要 注塑模具是在成型中赋予塑料以形状和尺寸的部件。模具的结构虽然由于塑料品种和性能、塑料制品的形状和结构以及注射机的类型等不同而可能千变万化，但是基本结构是一致的。模具主要由浇注系统、成型零件和结构零件三部分组成。其中浇注系统和成型零件是与塑料直接接触部分，并随塑料和制品而变化，是塑模中最复杂，变化最大，要求加工光洁度和精度最高的部分。浇注系统和成型零件浇注系统是指塑料从射嘴进入型腔前的流道部分，包括主流道、冷料穴、分流道和浇口等。成型零件是指构成制品形状的各种零件，包括动模、定模和型腔、型芯等 Abstract The injection mold is given in the plastic molding to the shape and size of components. Although the plastic mould structure and performance of varieties, the plastic products shape and structure and the types of injection machine and may the myriads of changes, but the basic structure is the same. Mainly by die casting system, molding parts and structural parts of three parts. The gating system and molding parts are in direct contact with the plastic parts, and varies with plastics and products, is the most complex, mold changes, requirements of part machining accuracy and finish the highest. There is not much requirement on the magnifying glass, it is the overall size, but large quantities of production, in order to improve the productivity, reduce the cost, the injection mold production batches. And the product is a magnifying glass to light, so the material using polystyrene (PS) as material. For the design of gating system and molding parts; pouring system refers to the plastic from the nozzle into the flow passage cavity before, including the mainstream, cold material, runner and gate. Molding parts refers to various parts of the form of product shape, comprising a movable die, mold cavity, core. This set of magnifying glass mould to realize mechanical automation, gating system using common channel, a mold two cavity injection. Article 2 the organization by the core and a rod, cavity dynamic model cavity and cavity. 目 录 摘 要 1 Abstract 2 目 录 4 前 言 7 第一章 塑件工艺分析 8 1.1 分析塑件使用材料的种类及工艺特征 8 1.2 分析塑件的的结构工艺性 8 1.3 塑件精度确定 9 1.4 明确塑件批量生产 9 1.5 根据塑件的形状估算其体积和重量 9 1.6 确定型腔数 10 第二章 确定模具结构方案 11 2.1 确定型腔排列 11 2．2确定分型面 11 2.3 脱模原理 12 2.4 浇注系统形式 12 2.4.1 主流道设计 12 2.4.2 分流道设计 13 2.4.3 浇口设计 13 2.5冷却