XZ25-50变速箱箱体工艺及粗镗孔夹具设计锥形套注塑模具设计（含全套CAD图纸）.doc

买文档后送图纸，QQ 194535455 摘要 题目一:XZ25-50变速箱箱体工艺及粗镗孔夹具设计 本文仔细分析了XZ25-50变速箱零件的形状、结构、特点及各项技术要求。根据给定的生产纲领参观了同类零件的生产工艺过程，经过对比分析结合企业的设备状况，制定了其加工工艺规程，并设计了其中80工序的粗镗孔专用夹具，为了满足该工序中各项技术精度要求，夹具采用了“一面两销”的可靠定位和移动压板夹紧机构，刀具的导向采用导套来实现。 关键词 变速箱；粗镗；工艺规程；专用夹具 题目二:锥形套注塑模具设计 本文分析了锥形套的材料、性能以及注射成型时的工艺特点，介绍了锥形套模具结构及其各个子系统的设计特点，重点设计了锥形套注射结构中浇注系统和脱模机构，根据以上的分析决定采用“一模十腔”点浇口注塑模具，推出系统采用推板和推杆联合推出机构。 关键词 注射成型；成型工艺；浇注系统；脱模机构 题目一： ABSTRACT This paper have a detailed analysis of the XZ25-50 gear box parts’ shape, structure, characte ristics and the various technical requirements. According to the production programe, the vist to the similar parts’ production process is had . By having a comparative analysis combining to the equipment situation of business, it’s machining technology regulations are developed and the eightieth process’ rough boring special fixture is designed. In order to meet the process’ various technical precision, the fixture is adopted the form of a face two pin to give a reliable location, adopted the mobile plate to clamp the parts and used the oritented sleeve to achive the tool-orientation. Keyword Gearbox Rough boring Technology regulations special fixture 题目二： ABSTRACT The cone-thimble’s material, performance and technology characters during cone-thimble injection molding are analyzed, the structure of cone-thimble mold and design specialty ineach of its sub-systems are introduced separately. Importantly,to design the demoulding mechanism and pouring system in the structure of cone-thimble mold. According to the above analysis, mold is adopted a mold ten cavity point gate injection mold and adopted the pushing-plate and putters compound pushing- mechanism. Keyword Injection moulding Moulding technology Casting system Demoulding mechanism 目 录 绪论 1 课题一： 2 1 箱体零件加工工艺规程设计 2 1.1 XZ25-50 变速器壳体的用途 2 1.2零件的工艺分析 2 1.3 确定箱体的生产类型 2 1.4 确定箱体毛坯制造形式和尺寸 2 1.4.1 确定毛坯的制造种类和制造方法 3 1.4.2 毛坯余量和工序余量的确定 3 1.5 定位基准的选择 3 1.5.1 粗基准的选择 3 1.5.2 精基准的选择 3 1.6 确定箱体零件各加工表面的加工方案 4 1.7 确定工艺方案的原则