照相机外壳的注塑模设计（含全套CAD图纸）.docVIP

买文档后送图纸，QQ 194535455 摘 要 本文是关于照相机外壳注塑模具设计。依照设计任务书的要求，设计主要分为三部分：第一，照相机前面板设计，查阅相关资料确定使用的材料以及材料的主要性能与特征，运用Aut/CAD画出零件的三视图；第二，根据实体模型对零件进行结构分析，确定注塑成型设备选择、浇注系统的设计、模具成型零件的设计、导向及脱模机构的设计、侧向抽芯机构的设计、温度调节系统的设计、其他模具零件的设计，对具体结构零件进行分析计算。用Pro/E对模具的型腔、型芯及其它零件进行三维造型，，并对其进行实体装配。第三，绘制装配图，以及相关的零件图。最后，运用Pro/E对注塑系统三维实体制作三维图演示。 本次设计的难点在于侧向抽芯机构的设计，采用生产中被广泛应用的斜导柱抽芯机构，通过采用整体式抽芯，实现侧向抽芯。抽芯时，为避免干涉现象的发生，在塑件机构允许的情况下，尽量避免将推杆设计在活动型芯的水平投影面相重合处，防止滑块喝导出机构复位时的相互干涉。滑块设在定模板的情况下，为保证塑件留在动模板上，开你哦前必须先抽出侧向型芯。 其他要注意的还有：为了脱模方便，抽芯稳定可靠，要选取顶杆脱模机构。为了方便顶杆循环工作，还必须设计复位杆来实现要求。 关键词：注塑成型；浇注系统；冷却系统 Abstract This article is about design of injection mold of camera shell. According to the requirments of description. determinate used materials’ performance and characteristic Mainly, design is divided, into three parts: First, the design for camera front panel, consult correlation data determination uses material as well as by consulting related information, draw components three views by using Auto/CAD; Second, equipments acording to the entity mold analy parts structure , determined the injection equipment, design gating system, the mold formation components, the guidance and mold emptier, lateral pulling core’s organization , the temperature control system and other mold components , carry on the analysis and calculation to the concrete constructional parts. With Pro/E, to space , care and other components carry on the three dimensional modeling and carry on the entity assembly . Third , plan assembly opening and closing cetion , as well as related detail drawing , the design of pulling. The difficulty lies in lateral pulling core organization adopt, uses widespread application slanting guide pillar pulling core organization, realize lateral pulling core through using the integral type pulling core, in order to, avoid the interference, to the organization permission in the situation, avoid the throwout lever design in floor projection appearance superposition place the activity core , Prevents the slide drinks derives w