晶粒尺寸和内应变不同的2种Fe粉的微加工过程与电磁性能.pdfVIP

46 8 Vol.46 No.8 2010 8 967—972 ACTA METALLURGICA SINICA Aug. 2010 pp.967–972 2  Fe  ∗         ( , 430070) 2 Fe ℄. , Fe , , Fe , 10 h Fe ; (t) 12 h, ℄, ; t=24 h, Fe , Fe . Fe , Æ℄ 20%, 1.5 mm −10 dB 8.2 GHz, −14.6 dB. Fe , , , TB3 A 0412−1961(2010)08−0967−06 THE MICRO–FABRICATING PROCESS AND ELECTRO- MAGNETIC PROPERTIES OF TWO KINDS OF Fe POWDERS WITH DIFFERENT GRAIN SIZES AND INTERNAL STRAINS ZHOU Jing, WANG Wei, SUN Zhigang, GUAN Jianguo State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070 Correspondent: GUAN Jianguo, professor, Tel: (027 E-mail: guanjg@whut.edu.cn Supported by National High Technology Research and Development Program of China (No.2006AA03A209) and Young Teachers from Fok Ying Tung Education Foun- dation (No.101049) Manuscript received 2010–03–10, in revised form 2010–05–13 ABSTRACT The micro–fabricating process and electromagnetic properties of two kinds of Fe pow- ders with different grain sizes and internal strains were studied. The results show that the homemade Fe powders with smaller grain size, larger internal strain and surface roughness than the carbonyl Fe powders, evolve into big and thin Fe flakes by micro–fabricating for 10 h with the help of the process control agent (PCA). When micro–fabrication for t=12 h, these Fe flakes will fracture and their av- erage width will reduce due to strong internal strain. When t is further prolonged to 24 h, th