颗粒包装机自动供料系统的毕业设计【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 颗粒包装机自动供料系统的设计 摘要 本设计是关于颗粒包装机自动供料系统的设计。颗粒包装机是将小颗粒产品通过计量装入包装袋内，再进行封装的包装机械。能较大提高生产效率、降低人工劳动强度。 本主要设计颗粒包装机的包装材料成型与供送系统，包括供辊，引导辊，成型器；物料供给系统，包括料斗，计量器，导流槽；以及计量器的传动系统。本次设计采用了象鼻成型器和改进后的转鼓式计量装置。 关键词：颗粒包装机；成型器；计量器 Abstract This design is about automatic feeding system of packaging machine. Granule packaging machine feeds small products through the measurement into the packing bag, and then packaging system to finish packing. It could greatly improve the production efficiency,and reduce labor intensity. This design mainly research materials for structure design and packaging material feeding system. Determined firstly by packing machine production capacity to complete material metering device size, thus completing the material supply. To determine the route followed by packaging materials to finished packaging material guide roller position feeding. Packaging material forming the main design particles this design packaging machine and feeding system, including the supply roller, and sent packing material guide roller, forming device; material supply system, including the hopper, measuring device, guide groove; and the metering transmission system. This design uses a drum type metering device for trunk shaper and it improved better than any other types which exist in this society. This design can improve the packaging performance, such as simple structure, light weight, small size, low cost of equipment, operation safety, convenient operation, and easy to repair and management for users. Key Words: granule packing machine; shaper; meter 目录 摘要 I Abstract II 1 绪论 1 1.1题目背景和意义 1 1.2国内外发展现状 1 1.2.1国外发展现状 2 1.2.2国内发展现状 3 2 包装机概述 6 2.1产品包装概述 6 2.2包装机的分类 7 2.3包装机的组成 8 2.4颗粒包装机的工作原理 3 方案设计及选择 1 3.1物料供送系统结构方案 1 3.2包装材料供送机构方案 1 4 机械部分设计 15 4.1计量装置设计计算 15 4.2生产能力计算 16 4.3制袋成型器的选择和设计计算 17 4.3.1常用成型器 17 4.3.2成形器的结构尺寸计算 20 4.4引导装置 24 4.5轴的设计 2 4.5.轴的结构设计 2 4.5.2轴的强度校核 2 4.6电机的选择 2 4.7其他零件的设计 2 5 总结 9 参考文献 3 致谢 3 毕业设计（论文）知识产权声明 3 毕业设计（论文）独创性声明 3 1 绪论 1.1题目背景和意义