基于通用CFD的地铁车站热环境模拟系统的开发与应用.pdfVIP

THE DEVELOPMENT FOR SUBWAY STATION’S THERMAL ENVIRONMENT BASED ON ALL-PURPOSE CFD SOFTWARE Yinghui Wang 1 TU Guang-bei 1 Tonghua Zou2 1 School of environmental，science and engineering, Tianjin University, Tianjin, PRC （300072 ） 2 Department of refrigerator and air-condition,Tianjin University of Commerce,Tianjin, PRC （300072 ） wanghonglin@ Abstract It is an undoubtedly fact that CFD (Computational Fluid Dynamics) analytical software makes an eminent roll in the indoor thermal environmental design. However, from the viewpoint of convenient, efficiency, reliability, which are cared for building design, CFD platform for special large-scale building like subway station is needed. This article takes an effort in the foundation of CFD platform for the indoor thermal environmental design of subway station, named SIMU_DDCZRHJ, based on PHOENICS. One difficult problem be faced is the spatial entity’s restructuring. According to the spatial data’s analysis approach that is put forward by the author, the simplified spatial data model has been set up, which offers the preliminary basement for the spatial database to the CAD/CFD system for the subway station. Keywords: Air, Metro, Spatial data, model, fluid 1 Introduction In common, for judging the satisfactory character of the subway station’s thermal environment to the passenger designers usually follows three qualitative standards including security, thermal comfort, and efficiency. Naturally, changing th