P91钢管特殊性能试验的研究.pdfVIP

  • 13
  • 0
  • 约3.03万字
  • 约 6页
  • 2017-08-31 发布于安徽
  • 举报
 试 验 研 究  P91 钢管特殊性能试验研究 杨华春, 屠  勇 ( ( ) ) 东方锅炉 集团 股份有限公司, 四川 自贡 643001 ( ) 摘  要 :测试了 P9 1 大口径钢管以及其焊接头在三个不同温度 550 ℃、575 ℃ 室温、 下的低周疲劳、 疲劳裂纹扩展速率和 550 ℃、575 ℃持久强度, 以研究分析温度对其低周疲劳特性、疲劳裂纹扩展、 持久强度的影响, 并了解焊接头与母材之间的差异。结果表明 :P91 钢管在高温下有较好的低周疲 劳特性、抗裂纹扩展能力、抗裂性能、适当的持久强度, 适宜用于高温工作。 关键词 :P91 钢管; 低周疲劳; 疲劳裂纹扩展; 持久强度 ( ) 中图分类号:TQ0504 ;TB3023   文献标识码 :A   文章编号 :1001 - 4837 2004 03 - 0006 - 05 Experimental Investigation on Special Performance of P91 Steel Pipe YANG Hua - chun , TU Yong (Dongfang Boiler Group Co. ,Ltd. ,Zigong 643001 ,China) ( ) Abstract :Low circle fatigue properties 、fatigue crack propagation rates at room temperature 、550 ℃、575 ℃ 、 ( ) creep rupture strength at 550 ℃、575 ℃ on weld joints of P91 pipe was investigated to study the temperature’ s influences on their behaviours. The difference of the properties between base metal and its weld joint was analysed. The results showed that P91 has good resistances to low cycle fatigue 、crack propagation 、cracking and adequate creep rupture strength at elevated temperature. P91 is good operating at elevated temperature. Key words :P91 steel pipe ;low cycle fatigue ;fatigue crack propagation ;creep rupture strength 1983 年纳入 ASME SA213 、1984 年纳入 SA335 规范

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档