基于FPGA数字调制系统设计.doc

摘 要 QuartusII软件上进行了逻辑编译，以及代码时序仿真，进而验证系统的可行性与可靠性。 关键词：现场可编程门阵列 ，频移键控调制，曼彻斯特编码 Abstract In science and technology are developing rapidly especially in communication field and the development of electronic information more prominent today, designers need a high-speed general hardware platform to realize and verify their communication system and related algorithm. The FPGA (field programmable gates array) as a large-scale programmable logic devices, the system structure and logic unit, flexible, integration, and wide application scope of short development cycle, design and manufacture of low cost, development tools and on-line inspection can be advanced, the product is widely applied in the prototype design and production. And the tradition of DSP (digital signal processor) or GPP (gm), FPGA processor in some signal processing tasks shows very strong performance, high throughput, architecture and algorithm, parallel computing and storage and distribution of the dynamic configuration advantages, therefore is very suitable for high-speed communication system design verification processing parts. Baseband The communications system based on FPGA baseband design verification platform using the large capacity and high performance FPGA device for communication system, the baseband design provides an effective realization of hardware platform. Based on FPGA and validation and computer simulation combining communication system will be greatly accelerated, rapid prototyping design part baseband, great place for real-time computation and show the algorithm has higher requirement of the validation. This paper based on FPGA realizing the digital signal modulation system implementation scheme by Manchester coding encrypted, by FSK digital modulation, and in the QuartusII software on the logical compiled,and reliability of the verification system. Key words：FPGA ，FSK，Manchester coding 目 录摘 要 I Abstract II 1 绪论 1 1.1 课题背景 1 1.2研究现状 1 1.3课题研究的目的和意义 2 2硬件平台概述 3 2.1 FPGA简介 3 2.2 FP