配电变压器节能运行智能控制装置设计与实现.pdfVIP

配电变压器节能运行智能控制装置的设计与实现 1 2 1 2 2 李宏亮 ，尹伟 ， 蒋汉民 ，陈杰 ， 易本顺 武汉供电公司洪山分公司，武汉市雄楚大街476 号，430079 武汉大学电子信息学院，武汉市珞喻路129 号，430079 Design and Implementation of Energy-saving Equipment for Distribution Transformers Based on Intelligent Control 1 2 1 2 2 Li Hongliang , Yin Wei , Jiang Hanmin , Chen Jie , Yi Benshun 1 State Grid Company Wuhan Branch, Xiongchu Road 476, Wuhan 430079. 2 School of Electronic Information , Wuhan University, Wuhan 430079 ABSTRACT: In this paper, the energy-saving point for the 的生产、供应和消费来看，输配电过程中存在巨大的节 operation of distribution transformers is analyzed by 能潜力。在输配电设备中尤以配电变压器的使用量大且 monitoring the transformers’ loads in real-time. Then the 面广，并且影响中、低压网络的线损。因此降低配电变 energy-saving equipment for transformers based on 压器损耗成了输配电系统节能工作中最为重要与迫切 intelligent control is designed. Technology of FPGA and 的任务。 DSP are used to develop the hardware system. With the 为了降低配电变压器损耗，应使变压器处于经济运 consideration of real-time load, the fuzzy control is used to 行状态。变压器经济运行是指变压器在损耗最小的状态 avoid the frequent switching of the switch and to prolong 下运行，此时电能损耗最少，运行费用最低。变压器经 the lifetime of the switch. The equipment is applied to 济运行的目的一是要减少损耗，节约能源；二是要尽量 distribution substation with multi distribution transformers 延长变压器的使用寿命，变压器在经济运行情况下，可 and has good practicability for electric power system’s 以大大提高它的使用寿命。 energy-saving. 要提高变压器的运行效率, 降低电能损耗, 就要 根据变压器运行特性来综合考虑以下方面: 1）合理选择变压器的容量； Key Words: energy-saving operation of transformers ；