【论文】综采割煤粉尘运移影响因素的数值模拟.pdfVIP

第36卷 第6期 北 京 科 技 大 学 学 报 Vol.36 No.6 2014 年 6月 Journal of University of Science and Technology Beijing Jun. 2014 综采割煤粉尘运移影响因素的数值模拟 谭 聪,蒋仲安 ,陈举师,王 佩 北京科技大学土木与环境工程学院,北京 100083 通信作者,E-mail:jza1963@263.net 摘 要 为解决综采割煤粉尘质量浓度高的问题,获取粉尘控制的合理参数,改善作业环境,以邢东矿2225工作面为研究背 景,依据气固两相流理论,运用Fluent软件对综采工作面割煤粉尘运动规律进行数值模拟,并与现场实测的粉尘质量浓度分布 情况进行对比分析,模拟结果与实际数据基本一致. 研究结果表明:工作面风速、采煤机滚筒转速、溜子速度以及壁面条件是 -1 -1 影响综采工作面粉尘质量浓度分布的几个重要因素. 当工作面平均风速在1.4m·s ,滚筒转速不超过2.5rad·s ,溜子速度 -1 不超过1.5m·s ,防降尘效果最佳. 同时洒水保持煤壁湿润也起到一定的捕尘作用. 关键词 煤尘;除尘;综采工作面;运动;影响因素;数值分析 + 分类号 TD714 .2 Numerical simulation of influencing factors on dust movement during coal cutting at fully mechanized working faces TAN Cong,JIANGZhong-an ,CHEN Ju-shi,WANGPei School of Civil and Environmental Engineering,University of Science and Technology Beijing,Beijing 100083,China Corresponding author,E-mail:jza1963@263.net ABSTRACT To resolve the problem of high dust concentration during the process of coal cutting at fully-mechanized working faces and obtain rational dust control parameters,aswell asto meliorateworking conditions,considering No.2225 workingface inXingdong Mine as a research background,numerical simulation was performed using FLUENT software to track dust movement laws during coal cutting at thefully-mechanizedworkingfacebasedonthetheory of gas-solidtwo-phaseflow. Comparedwiththe actual dust concentra- tion distribution in the mine,the simulation results are basically consistent with the actual data. Thewindvelocity at thefully-mecha- nized workingface,shearerdrumrotationspeed,valvespeed,andwallconditionmainlyaffectthedustconcentrationdistributionatthe