YB-10叶片泵的设计【毕业论文】.docVIP

本科毕业论文 （20 届） YB-10叶片泵的设计 专业：食品科学与工程 摘要 [摘要] 液压泵是将机械能转换为液压能的能量转换装置。在液压系统中，液压泵作为动力源，向液压系统提供液压能。随着国民经济的快速发展，齿轮泵在现代采矿设备,冶金设备,建筑机械,工程机械,农林机械用于发动机、汽轮机、离心压缩机、机床以及其他设备。由于一般双作用叶片泵的叶片底部通压力油,就使得处于吸油区的叶片顶部和底部的液压作用力不平衡,叶片顶部以很大的压紧力抵在定子吸油区的内表面上,使磨损加剧,影响叶片泵的使用寿命,尤其是工作压力较高时,磨损更严重所以在高压叶片泵的结构上必须采取措施,使叶片压向定子的作用力减小。常用的措施有减小作用在叶片底部的油液压力。abstract [abstract] Pump mechanical energy is converted to hydraulic energy conversion devices. In the hydraulic system, hydraulic pump as a power source to the hydraulic system hydraulic. Along with the rapid economic development, the gear pump in modern mining equipment, metallurgical equipment, construction machinery, engineering machinery, forestry machinery and other various sectors of the national economy is increasingly widespread use for the engine, turbine, centrifugal compressors, machine tools and other equipment. It is the production process of mechanization and automation indispensable mechanical equipment. Leaf-hydraulic pump can be sealed in accordance with the volume of work a week in the rotor rotary absorption, ranked number of different oil, leaves pump into two categories namely, single-and dual-role of the two. That is, a complete absorption, the single-row role in the oil leaves two suction pumps and the completion of the double row of oil pump blades, the role of single-leaf used to pump more variable pump, the pressure to 7.0 MPa, dual role of both quantitative pump vane pump , The general pressure for 7.0 MPa, the improved structure of the high-pressure pump leaves the greatest pressure to reach 16.0 ~ 21.0 MPa. Because of this requirement is the choice of dual-role vane pump. As the general role of double-blade pump at the bottom of the leaf-pressure oil, makes the leaves in the oil-absorbing area at the top and bottom of the hydraulic force imbalance, leaves a lot of pinched at the top of the arrival in the area within the stator Range On the surface, so that increased wear and affect the life of pump blades, in particular th