A747材料标准.pdfVIP

Designation: A 747/A747M – 99 Standard Specification for Steel Castings, Stainless, Precipitation Hardening1 This standard is issued under the fixed designation A 747/A747M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. 1. Scope E 353 Test Methods for Chemical Analysis of Stainless, 1.1 This specification covers iron-chromium-nickel-copper Heat-Resisting, Maraging, and Other Similar Chromium- corrosion-resistant steel castings, capable of being strength- Nickel-Iron Alloys4 ened by precipitation hardening heat treatment. 2.2 ASME Standard: 1.2 These castings may be used in services requiring corro- ASME Boiler and Pressure Vessel Code, Supplementary sion resistance and high strengths at temperatures up to 600°F Requirements S6, S14, and S275 [315°C]. They may be machined in the solution-annealed 3. General Conditions for Delivery condition and subsequently precipitation hardened to the de- sired high-strength mechanical properties specified in Table 3.1 Material furnished to this specification shall conform to S14.1 with little danger of cracking or distortion. the requirements of Specification A 781/A 781M, including 1.3 The material is not intended for use in