PSPICE计算机仿真.pptVIP

PSPICE计算机仿真 Simulation Program with Integrated Circuit Emphasis CH3 DC SWEEP ANALYSIS 直流扫描分析 3.1 Sweeping a single source Fig.26 Example 2 For the circuit shown in Fig.26, use PSpice to find the values of io and vo when vg varies from 0 to 100V in 10V steps.(P22) Fig.27 Place-Part Analog lib: R Source lib: Vsrc, Isrc Special lib: Iprint (ammeter安培表) Special lib: Vprint2 (voltmeter伏特表) 注意事项: Vsrc元件: 参数不需要改动 Isrc元件: 选中Isrc元件, (粉色表示被选中!) Edit-Properties… 修改DC项: 5, 如图27a Fig.27a 修改Isrc属性 Iprint元件需要执行Mirror操作: : 选中Iprint元件, (粉色表示被选中!) Edit-Mirror-Horizontally H 执行Mirror操作 Edit-Properties… 修改DC项: Y, 如图28 Fig.28 修改Iprint属性 Vprint2元件需要执行Mirror操作: 选中Vprint2元件, (粉色表示被选中!) Edit-Mirror-Horizontally H 执行Mirror操作 Edit-Properties… 修改DC项: Y, 如图28a Fig.28a 修改Vprint2属性 Fig.29 Simulation Settings dialog What does Probe do? We can also depict the results of the DC Sweep analysis graphically, using Probe. PSpice-Run(如图29a) View-Output file(如图30) Fig.29a Probe窗口 Fig.30 Output file Trace/Add Trace（Fig.31） 注意： Trace Expression: V2(R1) Fig.31 Selecting a variable: V2(R1) Fig.32 the resulting plot 3.2 Sweep Multiple Sources Example 3 The current source in the circuit shown in Fig.26 varies from 0 to 5A in 1A steps. For each value of the source voltage, plot i0 as vg varies from 0 to 100V in steps of 20V. Solution The schematic is the same as the one in Fig.27. In Capture, select the menu option PSpice/Edit Simulation Settings to specify a Secondary Sweep, the additional sweep variable and its values Fig.33. Fig.33 Simulation Settings dialog 2 We also changed the increment in the Primary Sweep from 10V to 20V(Fig.33a). Fig. 33a Simulation Settings dialog 1 Trace/Add Trace（Fig.33b） 注意： Trace Expression: I(R4) Fig.33b Selecting a variable: I(R4) Fig.34 the resulting plot? (It may be wrong! Please check!) * *